Grass pavers

Temporary reusable grass covering providing clean and stable pedestrian or vehicular access. Grass protection matting incorporating heavy-duty grass protection mesh, bonded to a strong non-woven needle-punched geotextile. Can be used to provide two functions for the temporary protection and access requirements on grassed surfaces, particularly in

Grassroad is a plastic interlocking honeycomb grid system developed in the USA in the 1980s, designed to support grass growth while allowing occasional vehicle or pedestrian use with minimal visual impact. Enables grass cover above 90% and is suited to areas where low visibility and intermittent access are needed

CellPave® 40 grass and gravel pavers are an interlocking cellular paving grid system for grass and ground reinforcement applications where there is regular pedestrian or vehicle use. CellPave® 40 permeable paving grids can be installed with either a grass or gravel filled surface and allow full rainwater penetration. Manufactured from UV

GF40 low-density polyethylene ground reinforcement tiles are recommended for use with aggregates or soil and grass seed for car parks, road extensions, driveways, emergency access routes, storage areas, footpaths and walkways. They are made from 100% recycled

BodPave® 85 cellular, interlocking, porous pavers are designed for natural grass reinforcement, ground stabilisation and gravel retention. Aimed at regularly trafficked surfaces, they have a load-bearing capacity up to 400t/m2 when filled. The open cell structure allows high surface water infiltration and is suitable for source control within a

CellPave 65 heavy grade paving grids – the ideal solution for intensive car parking and HGV roadway access areas. A high strength, high specification product made in the UK. CellPave 65® is capable of withstanding heavy loads, particularly when filled with gravel and will promote healthy grass growth due to the extra depth of the paver. Channel

Truckpave® is a heavy-duty paver designed as an alternative to concrete in areas trafficked by large and heavy vehicles. It is suitable for lorry access roads and parking areas, road-widening schemes, service yards, and motorway emergency turning areas. Advantages over concrete include: flexibility means it will not crack in adverse conditions; plastic acts as an insulator and will

CellPave GP from Groundtrax is a no-dig, interlocking grass paver matting system designed for use on grassed areas to support vehicle and pedestrian access. Made from 100% recycled material, CellPave GP is compliant with permeable paving regulations and features an 85% void ratio for water permeation. The grid structure incorporates ‘spring like

Mirum is a ‘green’ concrete paver in the classic 600 x 400 format that has a modern aesthetic and feel. It has a relatively large surface area and is ideal for creating environments with a sleek-lined pattern, interspersed with grass. Due to its rounded edges, the combination of Mirum pavers and the greenery gives a natural and creative look to

Park40 low density polyethylene (LDP) ground reinforcement tiles are recommended for gravel driveways subject to heavy traffic, overspill car parking, event parking, caravan parks and lawn and back reinforcement applications. The low density polyethylene they are constructed from is 100% recycled and can withstand frost and UV radiation. It is

Support: The rigid interlocking cells transfer the weight of traffic direct to the sub-base beneath, protecting grass and stabilising gravel. This reduces wear strips, rutting, uneven surfaces and gravel scattering beyond where it is laid. Permeable: The open structure of the cells (90% of surface area is porous) allows rainwater to pass through

GRB Plus is a plastic paver system suitable for ground protection, ground reinforcement and stabilisation. It provides excellent strength and protection whilst permitting the free-flow of water, minimising drainage problems: manufactured from 100% recycled polymer; manufactured in the UK; supports vehicles up to 250 tonnes; minimal maintenance

CellPave® AP is a ‘no-dig’ anchored ground reinforcement paving tile that provides a cost-effective way of reinforcing existing grassed areas. It is used extensively for car parking and to reinforce grassed aircraft runways and taxiways. The grids are a much stronger alternative to roll-out meshes that are pinned into place as the grids themselves

Park Pave units are manufactured from recycled plastic and 100% recyclable, making them environmentally-sympathetic and cost-effective. Park Pave Gravel is designed for gravel infill applications such as private driveways, footpaths and lightly trafficked car parks. The 30mm-deep panels are pre-assembled with a geotextile backing to speed up installation

Bodpave® 85 grass pavers / paving grids are a strong, interlocking, 100% recycled cellular porous plastic paving grid system for grass reinforcement, ground stabilisation and gravel retention for regular trafficked surfaces (pedestrian and vehicles). Can be installed with either a grass- or gravel-filled surface. The unique design resists lateral movement, improves traction and

Park30 low-density polyethylene (LDP) ground reinforcement tiles are recommended for gravel driveways subject to light traffic, overspill car parks and event parking, pathways, caravan parks, shed bases and lawn reinforcement. The low-density polyethylene they are constructed from is 100% recycled and can withstand frost and UV radiation. It is

GF50 ground reinforcement tiles are recommended for use with soil and grass seed for car parks, road extensions, driveways, emergency access routes, storage areas, footpaths, walkways, bank reinforcement and ground strengthening in landscaping. The low-density polyethylene they are constructed from is 100% recycled and can withstand frost and UV radiation

CellPave HD™ from Groundtrax Systems is a heavy-duty, truck-grade plastic permeable paving system designed for areas used by large and heavy vehicles. Suitable for access roads, parking areas and service yards, it supports either grass or gravel infill as an economical alternative to concrete or Grasscrete surfaces

Grasscrete is a cast-on-site cellular reinforced concrete paving system made from concrete with voids formed by styrene moulds, designed for permeable surfacing in trafficked and water management areas. Distinct from precast blocks, it supports up to 40 tonnes gross vehicle weight and provides optimal drainage

The new and improved Bodpave™ 40 interlocking plastic porous paving system for grass and ground reinforcement is designed for applications where there is regular pedestrian or vehicle use. It is made from 100% recycled plastic. The improved design incorporates 4 pre-clipped pavers that help reduce installation time by 25% versus traditional

CellPave® 50 cellular paving grids are a heavyweight solution for commercial parking areas and access tracks. Fully tested and certified by TUV for vehicles up to 60 tonnes. The interlocking cellular paving grid system can be infilled with a gravel or grassed finish. Manufactured from 100% recycled LDPE plastic, the permeable grass and gravel

Grassblock is a pre-cast concrete paving system designed for stable, low-vibration surfaces with integrated soil pockets for grass growth. Interlocking lugs limit movement, while a continuous concrete surround to each pocket helps prevent soil erosion, making it suitable for slopes and green areas. Depths range from 83 to 125mm

GF30 low density polyethylene ground reinforcement tiles are recommended for use with gravel and aggregates for car parks, road extensions, driveways emergency access routes, storage areas, footpaths and walkways. The low density polyethylene they are constructed from is 100% recycled and can withstand frost and UV radiation. It is naturally