CellPave® 50 cellular paving grids are a heavyweight solution for commercial parking areas and access tracks. Fully tested and certified by TUV for vehicles up to 60 tonnes.

The interlocking cellular paving grid system can be infilled with a gravel or grassed finish. Manufactured from 100% recycled LDPE plastic, the permeable grass and gravel plastic pavers are supplied per sq/m. 

CellPave® 50 grass pavers are a cost-effective solution to worn and rutted grassed areas, displaced gravel and for source control of surface water run-off. 

They are designed to be installed onto a well-prepared, free-draining and relatively even surface using either a ‘Reduced-Dig System’ or by employing a full sub-base construction incorporating a geogrid reinforcement layer.

Handling

CellPave® 50 grids can be easily cut with a common angle grinder or jigsaw. The grass reinforcement paver grids have a very open cell structure allowing unrestricted healthy grass root growth and water infiltration and can be used as part of a sustainable urban drainage system (SuDS).

Pavers should be installed onto a firm level sub-base (typically a DoT Type 3 or porous sub-base). The thickness of this base is dependant on the existing ground conditions and the design load specifications.

Please note that with all installations of grass pavers, it is strongly recommended that all areas should have sufficient drainage prior to installation. Failure to ensure this may result in the product not performing as intended.