Industrial gates

LockMaster™ SR2 security gates can be used to complement CLD's high-security fencing systems. Available in double- or single-leaf, the Securus welded steel wire mesh provides ample defence for government buildings, data centres, airports and secure units. Security features include adjustable anti-lift-off hinges, an anti-drill deadlock that is

SwingGuard is a robust, reliable automatic swing gate designed with intelligent and compliant automation to ensure it can serve effortlessly for many years. Purpose built, SwingGuard has a higher degree of control, and typically operating faster than swing gates fitted with electro or hydraulic actuators. SwingGuard can be supplied with any of the Barkers infill options

NOMS Approved Prison Gates by Zaun are high-security gates approved by the Ministry of Justice for use in prisons and mental health units. Made from pre-galvanised GalZal® steel wire, these gates are designed to match prison fencing and are supplied with HiSec 358 mesh, HiSec DualSkin mesh, or solid panels: high-security gate system for prison and

SlideMaster SR2™ cantilever automatic sliding gates can improve the security of access points. They carry certification to Loss Prevention Standards 1175 Security Ratings (SR1), providing a one minute delay time to physical attackers using basic tools. When greater levels of security are needed, the SlideMaster SR2 ™ cantilever sliding gate

Protek Palisade Gates by Alexandra Security are made from steel and designed for perimeter security, with bespoke sizing and anti-lift hinges. Double leaf gates include drop-bolts and ground sockets; single leaf gates can have drop-bolts added. All gates have a padlockable slidelatch: steel security gates, made to order; anti-lift inverted hinges

The Lockmaster S2 Auto™ LPS 1175 Issue 8 B3 (SR2) rated swing gate is a cost-effective way to upgrade to an automated system without the hassle of manual handling but with all the properties of a high-security access control solution. Available in double-leaf, the gates consists of two layers of Securus mesh with the automation fitted on the

The CSG 10140 sliding cantilevered gate is designed to provide a low cost crash tested sliding gate to prevent hostile vehicle mitigation. The gate successfully passed the PAS 68:2010 test and achieved the following 3 classifications: sliding Gate – 3000mm wide x 2400mm high : V/7500[N2]/64/90:1.7/0.0; sliding Gate – 5000mm wide x 2400mm high

SlideMaster™ cantilever sliding gate provide secure access and site protection for retail parks, industrial sites and other relatively low-level security locations. With a heavy-duty aluminium frame and a choice of infill – from standard vertical bar panels to any of CLD's mesh panel products – SlideMaster™ not only offers high security, but also

LockMaster S3 Auto™ swing gates are designed for projects requiring LPS 1175 Issue 8 C5 (SR3) security-rated automated gates to protect against the most determined intruders. They offer the highest level of security for ingress and egress in a cost-effective automated gate solution. Available in a wide range of widths and heights

SiteGard bi-folding double leaf temporary mesh gate is a site security gate made from powder-coated steel. It has a bi-folding design to reduce swing arc and clear uneven ground. Designed for temporary perimeter security, it allows flexible opening widths and can be mounted on concrete blocks for no-dig sites: bi-folding mesh gate for temporary

Protek® 1000 & 2000 v-mesh security gates are steel gates made from welded single-wire mesh with horizontal triangular folds for strength and rigidity. Designed for anti-climb, single and double leaf versions are stocked in heights of 1.8m, 2m, and 2.4m, with double leaf widths of 3m, 4m, 5m, and 6m, powder-coated in RAL 6005 Moss Green: metal

Terra Ultimate 180° from Frontier Pitts is a manually-operated, bi-directional hostile vehicle mitigation (HVM) hinged steel gate, impact-tested to IWA 14-1, stopping a 7.2t vehicle at 50mph, with a maximum width of 4500mm and standard height of 2400mm, suitable for locations with limited power supply

Automatic hinged/swing security gates are made from welded low carbon steel and designed for high-security access where sliding gates are not suitable. Available in single- or double-leaf, manual or automatic models, with a range of infill and finish options to suit different architectural styles and site requirements

LockMaster Go is a steel mesh security gate system made for quick supply and installation, this gate system is suitable for projects needing short lead times and is available in single or double leaf formats with multiple hanging options: steel mesh security gate system compatible with various fencing types; choice of four mesh infill options

Designed for securing commercial and industrial site entrances where only occasional access control is required. It is a robust and reliable gate with several safety features incorporated into the design as standard. These include a self-latching catch post, short leading edge beam and low bottom edge

SlideGuard RCS is an impact-tested, automatic cantilever gate accredited by PAS 68 to stop a 7.5 tonne vehicle. With two versions tested to mitigate the threat of vehicles travelling at 40mph and 50mph. The gate and locking pin can either be powered electronically or by a hydraulic motor depending on the site requirements. Both maintain a smooth

CLD FenceSafe SlideMaster sliding gates offer a permanent grade in a temporary installation. They are supplied complete with infills to match the Securus 358 fence line and are installed using CLD’s innovative FenceSafe 100% recycled bases. All of CLD’s temporary gates can be redeployed as the site perimeter changes and even converted to permanent

Platinum single-leaf, swing/hinged gates are made from welded low carbon steel, and designed for secure pedestrian access control. Security rated to LPS 1175 SR1, SR2 and SR3, and Secured by Design, they are available in manual, semi-automatic, and fully powered versions, with a range of access control options and sizes to suit different site

CLD LockMaster Solar is a solar-powered, automatic hinge gate system for vehicle access, designed for off-grid use with no mains power, trenching, or cabling required. Supports wireless integration, access control systems, and can be installed as surface-mounted, free-standing, single, or double leaf gates: solar-powered automatic hinge gate for

LockMaster SR3 Panic Out is a high security emergency exit gate made by CLD Systems, designed for secure sites needing an outward-opening, single leaf escape route. Rated to LPS 1175 SR3, it is protected by Securus mesh and vertical bars, and accredited by Secured by Design as a police preferred specification: high security emergency exit gate for

Vertical bar gates are a perfect match to vertical bar security fencing, sharing the principal design features of Jacksons welded semi pale-through-rail styles, such as Barbican and Sentry: available in a range of standard widths up to 12m and heights to 3m for pedestrian and vehicular access; single gates are supplied as right hand hanging

Multifold security entrance gates are designed for securing larger car park entrances. They also provide ventilation to allow exhaust fumes to disperse. Galvanised as standard; standard leaf designs have a 60 x 40mm RHS perimeter frame with 25mm-diameter tubes or 25mm SHS uprights at 125mm centres. Higher gates have a mid-rail for strengthening

Lang+Fulton manufactures Italia-80 sliding gates in compliance with BS EN 1722 to match all of their contemporary steel fencing systems. An extra-robust frame is recommended for industrial and commercial sites: manufactured to custom sizes; rectangular hollow section frames; infill panels - open-mesh electrofused gratings, louvred grilles or

Platinum automatic, fast-acting bi-folding gates are designed for high-security sites with limited space for gate movement. Made from fully-welded low-carbon steel, they withstand forced entry to LPS 1175 security ratings SR1, SR2 and SR3, and are available in a range of sizes and infill options