The Lockmaster S2 Auto™ LPS 1175 Issue 8 B3 (SR2) rated swing gate is a cost-effective way to upgrade to an automated system without the hassle of manual handling but with all the properties of a high-security access control solution.

Available in double-leaf, the gates consists of two layers of Securus mesh with the automation fitted on the inside of the compound, providing protection for application such as Government projects, data centres, airports and high-security units.

Security features include anti-lift-off hinges providing maximum security for the most high-security units.

Carrying certification to LPS 1175 Issue 8 B3 (SR2), LockMaster S2 Auto™ gates will withstand heightened threats and attacks from mechanical tools.

Features

  • Automated swing gates in a wide range of widths and heights

  • Available in double-leaf and inward opening

  • High-security LPS 1175 Issue 8 B3 (SR2) security rating

  • Double layer of Securus mesh infill to match B3 security rating

  • Full range of RAL colours available

  • High performance rated automated access control

  • Cost-effective, secure solution

  • Hot dip galvanised

  • Polyester powder coated

Applications

  • Government buildings

  • Data centres

  • Airports

  • Seaports

  • Utility projects

  • High-security units

  • Military and police sites

Dimensions

Height
2.4-5m

Width
2.4-10m

Post centres
Minimum 150 x 150mm but will increase depending on width

Finish

Hot dip galvanised and polyester-powder coated. Available in a range of RAL colours.

Additional information

LockMaster S2 Auto™ posts are manufactured with base plates and sizes of posts will be determined by the width of the gates ordered. Posts are flanged to accept any CLD system. Securus SR-rated mesh is attached to the gate using pin hex security screws and clamps.

All LockMaster S2 Auto™ gates have a purpose-made lock box with a slide-bar to enable the gates to be deadlocked, should the automation system need to be powered down.