LockMaster S3 Auto™ swing gates are designed for projects requiring LPS 1175 Issue 8 C5 (SR3) security-rated automated gates to protect against the most determined intruders.

They offer the highest level of security for ingress and egress in a cost-effective automated gate solution.

  • Automated swing gates in a wide range of widths and heights
  • Available in double-leaf and inward opening
  • Double layer of Securus mesh infill to match B3 security rating
  • LPS 1175 B3 (SR2) security rating
  • High performance rated automated access control
  • Cost-effective, secure solution

Features

  • High security LPS 1175 Issue 8 C5 (SR3) rating
  • Inward opening
  • Double leaf options
  • Automated security system
  • Full range of RAL colours available

Applications

  • Government buildings
  • Data Centres
  • Airports & Seaports
  • Utility Projects
  • High Security units
  • Military & Police Sites

Dimensions

Height
2.4m up to 5m

Width
2.4m up to 10m

Post Centres
Minimum 150 x 150mm but will increase in size depending on width of gate

Finish

Hot dip galvanised and polyester-powder coated. Available in a range of RAL colours

Specifications

  • Height: 2.4 up to 5m
  • Width: 2.4 up to 10m
  • Post centres: minimum 150x150mm but will increase depending on width
  • Hot dip galvanised
  • Polyester powder coated
  • Available in a range of RAL colours

Applications

The CLD LockMaster S3 Auto™ swing gate is ideal for high-security projects requiring a cost-effective automated system. Suitable for sites such as government buildings, military bases, police headquarters and other high-security sites due to its LPS 1175 Issue 8 C5 (SR3) rating.

When space and perimeter size is restricted, swing gates are the best option, requiring less scope than their counterpart sliding gates. Swing gates are also a cost-effective solution for projects that require budget-sensitive systems compared to the alternative bi-folding gates.

Additional information

  • LockMaster S3 Auto™ swing gate weighs 870kg including posts, which is approximately 330kg per leaf based on a 2.4 x 5m wide opening example.
  • The cycle time of a 5m-wide LockMaster S3 Auto swing gate is 20 seconds (which works out as 4 seconds per metre).
  • The locking system used as default is GL1 Electromechanical Gate Lock.
  • Gates must be installed by an authorised installation team.
  • Additional access control can be added later. Prior assessment may be required to ensure these actions do not compromise the security and accreditation of the gate system.
  • Additional access control options are available which are compatible with LockMaster S3 Auto gates, including key fobs, video intercoms and number keypads.
  • CLD Fencing Systems security topping, including barbed and razor wire, can be added to act as additional protection.
  • 24/7 support is offered if a LockMaster S3 Auto gates breakdown.
  • The gates can be switched to manual by a key holder if required or if there is a loss of power.
  • A service and maintenance agreement can be added to support the gates long term.