High security fencing

Lochrin Palisade Security Fencing is made from steel and designed for permanent site perimeter protection. Supplied in kit form, this fencing fits level or sloping ground and is suitable for general or high security with pale heights from 0.9m to 5.0m and 'D' or 'W' section profiles: steel security fencing system for site perimeters; kit form

Protek® 358 Elite by Alexandra Security is a high-security flat panel mesh fence system made for perimeter protection where resistance to forced entry is required. Approved to SR1/A1 standard by LPCB, it uses tight mesh spacing to deter climbing and cutting, and is made in heights from 1.8 to 3m. Matching gates are also available

HiSec SR1 (A1) Rated Fencing from Zaun is a perimeter security fence system made from 358 welded mesh with a 76.2 x 12.7mm aperture, designed for high-security sites needing Secured by Design accreditation and certified to LPS 1175 SR1 (A1). Mesh panels are available in multiple heights and are fixed with stainless steel tamper-resistant fittings

HiSec Prison is a security mesh fencing system made from pre-galvanised steel wire, designed for perimeter security at prisons and mental health units. Panels use a 358 mesh with 76.2mm x 12.7mm apertures and 4mm wires, making climbing and passing contraband difficult. Approved by NOMs and the Ministry of Justice for high-security use in the UK

SolarGard Orbit fencing system for solar farm boundaries has anti-climb mesh panels and high through-visibility. Panels have ‘V’ folds for strength and are fixed to posts with metal clips. They can be stepped to follow ground contours. Wildlife access gates allow small animals to pass through without reducing security. Heights: 1.2-3m

StronGuard™ Beam is a heavy-duty security fencing that combines an impact-tested beam with any of the Barkers StronGuard™ palisade security fencing range or SecureGuard SL2 mesh security fencing. This combination of products offers hostile vehicle mitigation of a 7200kg vehicle travelling at 80kph (50mph) whilst providing physical protection

Securus S3 was designed with Data Centres and other high profile sites in mind. Tested and certified to LPS 1175 C5 (SR3) Issue 8, it guarantees a minimum delay of 5 minutes against attack using tools like axes, bolt cutters and hacksaws. Securus is manufactured from twin 358 anti-climb panels with the majority of the fixings hidden, making this

Securus AC SR2 is a double skin 358 rigid mesh panel fencing system. Panels are made from twin layers of welded steel wire mesh which are attached to one another at primary and secondary posts, with additional joining clamps enhancing rigidity. Stainless steel security bolts also add to the strength of the fencing system, which conforms to BS

Trident Xtreme 3 combines a welded stopped pale-through-rail construction with horizontal rails sleeved on upright posts, concealed fixing, and 358 Securi-Mesh. Trident Xtreme fencing system offers enhanced levels of protection against attempts to penetrate the fence. Highly versatile, can be tuned to applications from decorative to highest

The Stronguard™ RCS retrofit crash system offers super-strong and durable ultimate security palisade fencing. It can be supplied new or retrofitted on site. Designed for the security of top assets which form part of the critical national infrastructure, Stronguard™ RCS provides unrivaled attack delay against saws, cutting, hammers, jacks, levers

Trident Xtreme 4 is designed for deployment at high risk sites such as transport, oil and energy, government, water, power stations, solar farms, communications and ports. Resistant to

Securus S1™ rigid steel wire mesh panel fencing provides perimeter security for schools, police stations, utility suppliers and airports. The 358 anti-climb mesh fencing panels are fixed to steel posts with a solid clamp bar for added security. Securus S1 is certified to LPS 1175 A1 (SR1) to withstand basic tool attacks, and is approved for

Securus 10 S2 from CLD Systems is a single-layer rigid mesh fencing system designed for high security sites, tested and certified to LPS 1175 Issue 8 B3 (SR2) for resistance to attack: single-layer rigid mesh fencing system for high security perimeter protection; tested to LPS 1175 Issue 8 B3 (SR2) for security performance; minimum 3 minutes delay

Securi-Mesh 358 Plus fencing is designed for high security perimeter and access control applications that require a close mesh design. The climb resistant double layer mesh exceeds Home Office specifications for use in prisons. Small apertures and welds at each intersection eliminate foot and finger holds and prevent objects being passed through

HiSec 358 security fencing system from Zaun is a welded mesh perimeter fence designed for high-security applications, using a 76.2 x 12.7mm mesh pattern to prevent climbing and intrusion. Panels can reach up to 7 metres in height and integrate with access control, CCTV, and security toppings: welded mesh security fence with anti-climb 358 mesh

The Linebacker cable crash fence and gate system will stop a 7.5 tonne vehicle traveling at 50 mph (80km/h). It has passed BSi PAS 68:2010 for the performance of vehicle security barriers and their supporting foundations when subject to a single horizontal impact: quick to install; single unbroken cable lengths; cable supported with posts at 6m

SolarGard Titan is a high-security fencing system made for solar farm perimeters. With tightly spaced single wire mesh panels and an LPCB SR1 security rating. Designed to prevent climbing and cutting, it meets UK police and insurance guidelines and includes wildlife access gates for environmental protection: high-security mesh fencing system for

Barbican® Extra A1 LPS 1175 SR1 security fence panels feature a welded pale-through-rail construction for strength and security. The additional pales through the top rail make it difficult to scale. It is suited to commercial properties, schools, or applications where a fence with enhanced protection against climbing is specified: LPS 1175 SR1

Lochrin Combi SL1 is a security-rated palisade fencing system made from vertical pales passing through horizontal rails, secured with counter-bored bolts on the rail face, suited for sites needing certified perimeter protection to LPS 1175 Security Rating A1 and Secured by Design standards: security fencing system with through-rail pale design and

SecureGuard SL1 is a high-security fencing system that uses SecureGuard 358 mesh and has been tested by the LPCB to LPS 1175 A1 (SR1). SecureGuard SL1 provides resistance against attack by bodily force or basic tools for over 60 seconds. It helps mitigate unauthorised access and vandalism and provides good visibility to aid CCTV and security

Barbican Barbed-Top fencing with barbs welded to the top of each pale acts as a highly effective deterrent and barrier to intruders. The welded pale -through-rail construction and concealed, sleeved panel to post fixings provides strength and security to the fencing. It is suited to applications where a fence with a recognised security rating and

Securus ScreenFence is a combined security fence and privacy screen. Fence panels are made using 358 rigid welded mesh. Polyethylene (PE) screens are interwoven and fixed with custom made clip fixings and sturdy bolts. Mesh is galvanised and powder-coated to minimum 60 microns: rigid wire mesh with interwoven PE privacy screen; fence heights from

Available exclusively through Jacksons, Alarm-aFence® is a cost effective and reliable combined alarm and electric fence deterrent designed to provide a physical barrier that delivers a non-lethal electric shock and alerts any attempted intrusion. Often used to provide additional security and protection to the perimeter of many of the UK's key

RDS Original PAS 68 is a temporary crash fence system made from fence panels and posts, designed for rapid deployment and removal without foundations. Crash tested to BSI PAS68:2010, it stops 2.5 and 7.5-tonne vehicles