Securus AC SR2 is a double skin 358 rigid mesh panel fencing system.

Panels are made from twin layers of welded steel wire mesh which are attached to one another at primary and secondary posts, with additional joining clamps enhancing rigidity. Stainless steel security bolts also add to the strength of the fencing system, which conforms to BS 1722-14 for open mesh steel panel fences.

Carrying certification to LPS 1175 SR2, Securus AC ™ is proven to withstand sophisticated attacks from mechanical tools. This makes it the ideal choice for all high risk sites, especially when governing bodies dictate a security standard which conforms to global standards.

Features

  • Double layer 358b welded steel wire mesh system

  • High strength rolled post design

  • Certified by the Loss Prevention Certification Board to to LPS 1175 SR2 Issue 7 to provide a minimum of 3 minutes delay against attack

  • Approved for Government Use - contact CPNI for further information

  • Good visibility for CCTV

  • Full range of RAL colours available

  • Compatible with the active anti-intruder range

  • Additional security toppings available

Dimensions

Heights
2440mm to 5000mm

Panel Width
2515mm

Mesh Size
76.2 x 12.5mm

Wire Diameter
4mm (horizontals and verticals)

Top Edge Projection
Nil – wire is flush on all edges

Posts
80 x 60mm special flanged section (patent applied for)

Corner Posts
80 x 80mm standard RHS section

Post Centres
2520mm / 1260mm

Finish

CLD welded steel wire mesh perimeter security fencing panels are galvanised and polyester powder-coated after stringent cleaning and treatment to give a well-adhered coating of 60 microns. Or available as galvanised only which is a high aluminium content galvanising giving four times the life of BS 443. This finish is free of the sharps and irregularities found in the hot dip galvanising process. RAL range of colours available.

Sloping ground

Panels can be stepped as required on the post system. Where gradients exceed 1:16, it is recommended that taller panels are either part-buried or additional posts are used. Panels can also be slopped to the following gradients, within the tolerance of the post section.

  • 2440mm high 1 in 60

  • 3000mm high 1 in 75

Variations

The posts are available in different lengths to accommodate panel heights and ground conditions.

  • Base plated

  • Ranked or straight extensions for barbed or razor wire

Applications

  • Secure units

  • High risk sites

  • Government buildings

  • Utility suppliers

Accreditation

  • Loss Prevention Standards 1175 Security Ratings (SR2)

  • Secured by Design

  • Conforms to BS 1722-14