Securus S3 was designed with Data Centres and other high profile sites in mind. Tested and certified to LPS 1175 C5 (SR3) Issue 8, it guarantees a minimum delay of 5 minutes against attack using tools like axes, bolt cutters and hacksaws.

Securus is manufactured from twin 358 anti-climb panels with the majority of the fixings hidden, making this fence hard to penetrate or vandalise.

Key Features

  • Supplied as assembled cassettes for faster intallation

  • Tested and certified to the latest LPS 1175 C5 (SR3) security standard

  • Polyester powder coated in a full range of RAL Colours including marine grade

  • Minimum of 300mm ground bury to prevent under digging

  • Can be used with any hostile or non-hostile security topping

  • Secured by Design accredited

Dimensions

Panel Width
2518mm

Wire Diameter
4mm verticals

Mesh Size
76.2 x 12.5 mm

Heights
2440mm to 5000mm

Nominal Heights
2.4m to 5.0m

Post Dimensions
100mm x 100mm

Post Centres
2530mm +/- 9mm

Finish

Options:

  • Polyester powder-coated to 60-80 microns

  • 160-200 microns with marine grade and metallics

  • Any RAL colour available

Technical Specifications

  • Panel type: Double layered mesh cassette system. Mesh and wire. Double layered mesh cassette system. Galvanised and powder coated to minimum 80 microns dft

  • Panel installation: Bottom of panel minimum 100mm below ground or option for maximum 50mm above ground. Base plated and no ground bury options also available

  • Security topping options: Barbed and razor wire, cranked and straight

  • Posts: Special flanged post, galvanised after manufacture and polyester powder-coated to match fencing

  • Fixings: 100mm x 5mm full length clamp bar. M8 Stainless Steel cup square bolt (min 100mm) and SafeTFix ™ nut

  • Foundations: Set posts in holes minimum 450mm square x 950mm deep. Note: Contractor/ client is responsible for the foundation size suitable for the ground conditions and fence height

  • Warranty: Minimum of 15 years against manufacturing defects