Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
LPS B3 SR2 fencing
(26)
LPS B3 SR2 fencing for high-security perimeter protection at utilities, data centres and critical infrastructure. Certified to LPS 1175 B3 (formerly SR2). Rigid steel mesh panels with secure posts and fixings. Compatible pedestrian and vehicle gates. Delays forced entry using defined hand tools in BRE tests.
LPS B3 SR2 fencing - helping you find the best solution for your project.
Securus S2 - 358 rigid mesh security fencing, LPS 1175 B3
Securus S2 fencing is made up of two layers of rigid mesh cassettes, fastened with a full length clamp bar to give sites high levels of security. Tested and certified to LPS 1175 Issue 8 B3 (SR2) it is designed to withstand threats and attacks from a range of tools for a minimum of three minutes: high security fencing system; 358 anti climb double- PRODUCT
CLD Physical Security Systems
Securus 10 S2 - LPS 1175 B3 (SR2) Issue 8 security fencing
Securus 10 S2 from CLD Systems is a single-layer rigid mesh fencing system designed for high security sites, tested and certified to LPS 1175 Issue 8 B3 (SR2) for resistance to attack: single-layer rigid mesh fencing system for high security perimeter protection; tested to LPS 1175 Issue 8 B3 (SR2) for security performance; minimum 3 minutes delay- PRODUCT
CLD Physical Security Systems
Securus AC – 358 rigid mesh fencing for rapid 2-man install
Securus AC is a high security fencing system made with 358 anti climb double layer mesh fencing with a minimum 2 person install. Securus AC is tested and certified to LPS 1175 Issue 8. The system holds a B3 (SR2) security fencing classification and is designed to delay the latest threats in physical attacks on perimeters. Offsite manufacturing- PRODUCT
CLD Physical Security Systems
SecureGuard™ RCS - crash-tested mesh security fencing (PAS 68)
Barkers’ SecureGuard™ RCS is the only standalone PAS68 accredited mesh fence, tested to stop a 7.5t vehicle at 30mph and builds on the success of the palisade version – StronGuard RCS. Secures data centre sites; protects rail networks from road vehicles getting onto the tracks; various military and critical national infrastructure sites- PRODUCT
Barkers Security Engineering
HiSec SR2 (B3) Rated Fencing - steel mesh security perimeter fence system
HiSec SR2 (B3) Rated Fencing by Zaun is a high-security perimeter fencing system developed for sensitive and high-profile sites, made from 4mm horizontal and 10mm vertical wires with 76.2mm mesh spacing. Certified to LPS1175 B3 (SR2) and Secured by Design, it uses a post and clamp bar system with stainless steel fixings for a secure, flush
Rampart 30 - multi-threat security fence
Rampart 30 is a high security fence system combined with shallow foundation hostile vehicle mitigation (HVM). Rampart 30 has been rated to PAS 68:2010 which means it can stop a 7.5 tonne vehicle moving at 30 miles per hour (48 kilometres per hour). The system can be used with any of CLD’s Securus S1, S2, S3 or S4 fence panels depending on threat- PRODUCT
CLD Physical Security Systems
High-security fencing for data centres
CLD manufactures a range of data centre fencing and gate solutions that offer the highest level of protection with guaranteed delay against attack while providing the following features: tested to LPS 1175; Secured by Design; anti-climb protection mesh with additional security toppings; guaranteed minimum delay times of 1 to 3 minutes
Protek® Elite Defender - SR2/B3 mesh security fencing
Protek® Elite Defender is a high-security fencing system from Alexandra Security, made from single-skin mesh panels with a patented fixing system. Certified to LPCB LPS 1175 B3 (SR2), it is designed for fast installation, adaptable to sloping ground, and suitable for securing critical infrastructure and sensitive sites- PRODUCT
Alexandra Security
Lochrin Combi™ SL2 palisade fencing (SR2, Secured by Design)
Lochrin Combi™ SL2 palisade fencing achieves Security Rating B3 (SR2) to LPS 1175 Issue: 8. The system is also Secured by Design and conforms to BS 1722 Part 12:2016. This patented palisade system was developed for the SR2 market, offering the same attack delay times with a product that is very cost-effective. Developed with simplicity in mind
StronGuard™ Beam - impact-tested high-security fencing (IWA-14)
StronGuard™ Beam is a heavy-duty security fencing that combines an impact-tested beam with any of the Barkers StronGuard™ palisade security fencing range or SecureGuard SL2 mesh security fencing. This combination of products offers hostile vehicle mitigation of a 7200kg vehicle travelling at 80kph (50mph) whilst providing physical protection
RamPro 50 - anti-ram vehicle HVM fencing
CLD RamPro 50 is a heavy-duty hostile vehicle mitigation (HVM) fence system made from steel, independently tested and certified to LPS 1175 (A1 to D10) and ISO 22343-1:2023, designed to stop a 7.5-tonne vehicle at 50 mph and compatible with CLD mesh panel ranges: high-security fencing system with integrated hostile vehicle mitigation; certified to- PRODUCT
CLD Physical Security Systems
Securi-Mesh® 358 Plus SR2 - security rated mesh fencing
Jacksons Securi-Mesh® Plus SR2 system provides an ideal solution for a wide variety of higher perimeter security applications with its double layer of "358" mesh and small apertures which eliminate foot and finger holds and prevent objects being passed through. Vertical steel clamp bars employed in the panel to post fixing and bond mesh layers- PRODUCT
Jacksons Fencing
Securus AC SR2 - 358 rigid mesh security fencing to LPS 1175 SR2
Securus AC SR2 is a double skin 358 rigid mesh panel fencing system. Panels are made from twin layers of welded steel wire mesh which are attached to one another at primary and secondary posts, with additional joining clamps enhancing rigidity. Stainless steel security bolts also add to the strength of the fencing system, which conforms to BS- PRODUCT
CLD Physical Security Systems
Lochrin UltraGUARD™ SL2 high-security fencing system
Lochrin UltraGUARD™ SL2 was developed to offer a high-security, single-skin fencing system for simple installation while offering a cost-effective, security-rated solution. Based on the company's traditional 358 panel, the vertical wire has been increased from 4 to 10mm, providing a more robust system which negates the need for double-skin 358
Securus - 358 rigid mesh high-security fencing system
Securus™ is a 358 mesh high-security flat panel-and-post fence system that provides security and rigidity without compromising on the aesthetic appeal of mesh systems. Small aperture anti-climb 358 welded mesh. Heights 1830, 2030, 2440, 3000mm as standard, up to 5.2m to order. LPS 1175 A1 to D10 security-rated options- PRODUCT
CLD Physical Security Systems
RamPro 30 - steel anti-ram HVM fence
CLD RamPro 30 is a high-strength hostile vehicle mitigation fencing system designed to protect critical infrastructure from forced entry and vehicle attacks, independently tested to LPS 1175 (A1 to D10) and ISO 22343-1:2023, and capable of stopping a 7.5-tonne vehicle at 30 mph: high-security fencing system for hostile vehicle mitigation- PRODUCT
CLD Physical Security Systems
StronGuard™ SL2 - steel palisade security fencing LPS 1175 B3 (SR2)
Stronguard™ SL2 steel palisade security fencing system can easily cope with up to 33° of sloping without the need for onsite modifications. Stronguard™ SL2 provides resistance and protection against attack from tools such as bolt cutters, claw hammers and drills for over 3 minutes during testing by LPCB to LPS 1175 B3. This makes Stronguard™ SL2
Rampart 50 - multi-threat security fence
Rampart 50 is a shallow foundation high security fence system with integrated hostile vehicle mitigation (HVM). Rampart 50 has been rated to IWA 14-1:2013 which means it can stop a 7.2 tonne vehicle moving at 50 miles per hour (80 kilometres per hour). The system can be used with any of CLD’s Securus S1, S2, S3 or S4 fence panels depending on- PRODUCT
CLD Physical Security Systems
SecureGuard SL2X - high-security mesh fencing (LPS 1175 B3 (SR2) & C1)
SecureGuard SL2X is a high-security fencing with LPCB LPS 1175 B3 (previously SR2) rating. SL2X achieves its strength from 10mm-diameter vertical wires, a design which means the strength of the system comes from the mesh panel itself rather than any additional features. It is lighter and easier to install, and offers considerable cost savings to comparable systems- PRODUCT
Barkers Security Engineering
LPS B3 SR2 fencing - helping you find the best companies for your project.
CLD Physical Security Systems
High security welded mesh fencing. Heights up to 6.0m. Adaptable for anti-intruder toppings
Barkers Security Engineering
Steel palisade and rigid welded mesh high security fencing. Includes LPCB rated designs
Etna Works, Duke Street, Fenton, Stoke-on-Trent, ST4 3NSLochrin Bain
Leading manufacturer of security fencing systems. The company’s extensive product range includes the patented Home Office approved and CPNI rated Combi™ Palisade system, a Police preferred Secured by Design range, and a large stock of general purpose perimeter systems. Security solutions are available for any budget
Lochrin Works, 7 Limekilns Road, Blairlinn Industrial Estate, Cumbernauld, G67 2RNAlexandra Security
Perimeter Works, Whetsted Road, Five Oak Green, Tonbridge, TN12 6PZJacksons Fencing
Jacksons High Security Fencing delivers integrated perimeter security and access control solutions for a wide variety of applications; from the decorative and secure to the secure and intimidating. When high security fencing is the only viable option our specialist products are designed to provide the highest level of protection possible. Our
