- Product name
- Securus S2
- System type
- Rigid mesh systems
- Product accreditation
- BS 1722-14
- LPS 1175 Security Rated
- SR2 B3 LPS 1175
- Secured by Design
- Fence height
- 2440mm to 5000mm
- Panel width
- 2520mm
- Aperture size
- 76.2mm x 12.5mm
- Wire / bar diameter
- 4mm
- Post centres
- 2533mm +/-15mm
- Post sections
- 80mm x 60mm
Securus S2 fencing is made up of two layers of rigid mesh cassettes, fastened with a full length clamp bar to give sites high levels of security.
Tested and certified to LPS 1175 Issue 8 B3 (SR2) it is designed to withstand threats and attacks from a range of tools for a minimum of three minutes.
Key Features
High security fencing system
358 anti climb double layer mesh fencing to BS 1722 Part 14 : 2017
LPS 1175 Issue 8 B3 (SR2) tested and certified
Minimum of 3 minutes delay against attack
Secured by Design accredited
Additional security toppings available including barbed wire, razor coil and non-hostile systems
Full range of RAL colour available
Base plate and ground bury options available
Off-site manufactured fence cassettes for reduced installation time compared to Securus SR2 AC
Applications
Data Centres
MoD
Utilities
Ports & Airports
Dimensions
Panel Width
2518mm
Wire Diameter
4mm
Mesh Size
76.2 x 12.5 mm
Available Heights
2440mm to 5000mm
Nominal Heights
2.4m to 5.0m
Post Dimensions
80mm x 60mm
Finish
Options:
Polyester powder-coated to 60-80 microns
160-200 microns with marine grade and metallics
Any RAL colour available
Technical Specification
Panel Type: Double layered mesh cassette system. High aluminium content. (Note: Fence Cassettes are supplied assembled for ease of install, mechanical lifting required – can be supplied unassembled)
Panel installation: Bottom of panel minimum 100mm below ground. Base plated and no ground bury options also available
Security Topping Options: Barbed and razor wire, cranked and straight
Post Centres: 2535mm +/- 15mm
Posts: Special flanged post, galvanised after manufacture and polyester powder-coated to match fencing
Fixings: 120mm x 6mm full length clamp bar. M8 Stainless Steel cup square bolt (min 30mm)
Foundations: Set posts in holes minimum 450mm square x 950mm deep. Note: Contractor/ client is responsible for the foundation size suitable for the ground conditions and fence height
Warranty: Minimum of 15 years against manufacturing defects












