Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Industrial gates
(188)
Industrial gates for perimeter security and controlled vehicle access at warehouses, logistics hubs, utilities and transport sites. Sliding, swing, cantilever and bi-fold formats. Manual or automated with motors, safety devices and access control. Mesh, palisade or solid infills in galvanized or powder-coated steel. CE/UKCA compliant; security-rated options.
Industrial gates - helping you find the best solution for your project.
Italia-100 steel louvred gate
Lang+Fulton manufactures Italia-100 steel louvred gates in compliance with BS EN 1722 to match all of their contemporary steel fencing systems. An extra-robust frame is recommended for industrial and commercial sites: manufactured to custom sizes; rectangular hollow section frames; infill panels - open-mesh electrofused gratings, louvred grilles
Secured by Design manual or automatic bi-folding, fast-acting speed gates
Bi-folding speed gates from Frontier Pitts are fast-acting security gates designed for locations with limited space for movement. Made from welded low carbon steel with bar and mesh infill, they are available in manual or automatic models, with overhead track, bottom track or trackless options. Standard and bespoke sizes are offered for a range of- PRODUCT
Frontier Pitts
Sliding Cantilevered Gates
The Security Sliding Gate is a cantilevered gate which requires no ground track or support across the roadway. The gateleaf is supported by a main bottom beam, which slides 100mm above the road surface. The balance is provided by a unique runback track, which enables the gate to be fully projected across the roadway without tipping. 100% duty
SiteGard - single leaf mesh temporary pedestrian gate
SiteGard single leaf mesh temporary pedestrian gate by Alexandra Security is a powder-coated steel gate with a wire mesh infill. Designed for secure, visible pedestrian access on construction sites. Mesh frame allows clear sightlines and can be clad for privacy. Temporary Works Approved and suitable for reuse or recycling: single leaf mesh gate- PRODUCT
Alexandra Security
Terra G8 - anti-terrorist sliding gate tp IWA14-1 & LPS1175
The IWA 14-1 Terra G8 cantilevered sliding security gate can secure entrances of 8m plus, providing counter terrorist protection for wider access points and the flexibility to suit individual site requirements. New for 2025! The Terra G8 Sliding Gate is now approved to LPS1175 with security ratings A1 (SR1), B3 (SR2) and C5 (SR3) The Terra G8 is- PRODUCT
Frontier Pitts
Protek 868 - rebound mesh sports field and MUGA gates
Protek® 868 rebound mesh sports gates by Alexandra Security are designed for rigidity, to allow balls to rebound back into play. With welded mesh panels fixed to a steel frame, with inverted hinges to prevent lift-off and a padlockable slide-latch. Single and double leaf gates are stocked in various heights and widths, with bespoke sizes- PRODUCT
Alexandra Security
CSG 10630 Crash Rated Surface Fixed Bi-Folding Gate
CSG 10630 Crash Rated ‘Surface Fixed’ Bi-Folding Gate from Cova Security Gates is a surface-mounted, automated bi-folding gate designed to withstand vehicle impact at 30mph (48km/h) by a 3500kg car or light van. For locations where excavation is not possible, such as underground car parks: surface-fixed, crash rated bi-folding gate for hostile
FoldGuard RCS - impact tested, automatic bi-folding gate (PAS 68)
FoldGuard RCS is an impact-tested, automatic bi-folding gate. With three versions available, tested to mitigate the threat of vehicles travelling at 40 and 50mph. The gate and locking pin are powered by a hydraulic drive unit for consistent and controlled motion, which ensures smooth and quiet operation in both directions. Typically operating in
Steel Palisade Security Gates - metal gates for site security
Alexandra Security palisade security gates are made from galvanised steel for permanent perimeter access control. They have a triple pointed top and “W” profile pale as standard. Single-leaf pedestrian gates (1m wide) are stocked in 1.8m, 2m, and 2.4m heights, double-leaf vehicle gates are stocked in 2.4m high x 6m wide. Custom sizes are available
CSG 10601- bi-folding tracked gate
CSG 10601 is the first generation bi-folding speed gate. It is suitable where height and span of opening are critical factors. Ideally suited for special appearances and bespoke design, CSG 10601 is regularly used by architects when specifying timber, glass and sheet steel requirements: opening / closing speed 4 seconds - programmable for slower
SlideGuard - automated cantilever sliding gate, rail infill
SlideGuard cantilever gates with railings create a secure and durable access point for industrial sites, schools, commercial and business parks. Automated or manual operation; gate heights from 1.0-3.0m; spans to 12m; CHS or RHS railing infill
Taxi Way - steel tracked sliding security gates
Taxi Way tracked sliding security gates are made from fully-welded low-carbon steel and designed to secure wide entrances up to 35m. Suitable for continuous, frequent use, these gates run on a track set 5mm below finished road level and are powered by a single-phase 230V supply. Safety systems, access controls and a range of infill and finish- PRODUCT
Frontier Pitts
Sliding steel security entrance gates
Lang+Fulton designs and manufactures gates in compliance with BS EN 1722 to match all of its contemporary steel fencing systems. Made to custom sizes from rectangular hollow section frames. Infill panels available from a range of open-mesh electrofused gratings, louvred grilles or tubular railings. An extra-robust frame is recommended for
FenceSafe LockMaster temporary swing gate
CLD FenceSafe LockMaster gates offers a permanent grade solution in an on-ground format. The gate is supplied complete with infills to match the security of the fenceline and is installed using CLD’s innovative FenceSafe 100% recycled bases or kentledge blocks. All CLD’s temporary gates can be converted to permanent access control solutions- PRODUCT
CLD Physical Security Systems
Torino-22 - steel sliding gates for industrial and commercial sites
Lang+Fulton manufactures Torino-22 sliding gates in compliance with BS EN 1722 to match all of their contemporary steel fencing systems. An extra-robust frame is recommended for industrial and commercial sites. Made to custom sizes; rectangular hollow section frames; infill panels - open-mesh electrofused gratings, louvred grilles or tubular railings
CSG 10700 Series - steel pedestrian security gate
CSG 10700 Series High Security Pedestrian Gates by Cova Security Gates are made for secure pedestrian access at perimeter boundaries, helping to separate foot traffic from vehicle entry points. Manual and automated models support a range of locking systems and access controls, with customisable infill, frame, and finish options. Certified to LPS
Automated / manual sliding cantilevered security gates
Sliding gates can overcome the problem of gaining or preventing access to wide entrances when the use of conventional swing gates is not feasible or space is at a premium. Readily motorised, sliding gates can form part of an integrated electronic access control system and can be opened remotely or on timers. The cantilever design means there is no
NOMS Approved Prison Gates - steel security gates for prison fencing
NOMS Approved Prison Gates by Zaun are high-security gates approved by the Ministry of Justice for use in prisons and mental health units. Made from pre-galvanised GalZal® steel wire, these gates are designed to match prison fencing and are supplied with HiSec 358 mesh, HiSec DualSkin mesh, or solid panels: high-security gate system for prison and
Lockmaster S2 Auto™ automated swing gates - LPS 1175
The Lockmaster S2 Auto™ LPS 1175 Issue 8 B3 (SR2) rated swing gate is a cost-effective way to upgrade to an automated system without the hassle of manual handling but with all the properties of a high-security access control solution. Available in double-leaf, the gates consists of two layers of Securus mesh with the automation fitted on the- PRODUCT
CLD Physical Security Systems
Protek Palisade Gates - steel security gates for perimeter fencing
Protek Palisade Gates by Alexandra Security are made from steel and designed for perimeter security, with bespoke sizing and anti-lift hinges. Double leaf gates include drop-bolts and ground sockets; single leaf gates can have drop-bolts added. All gates have a padlockable slidelatch: steel security gates, made to order; anti-lift inverted hinges
Steel louvred gates
Lang+Fulton designs and supplies gates in compliance with BS EN 1722 to match all its contemporary steel fencing systems. Hinged or sliding gates are manufactured to custom sizes from rectangular hollow section frames with infill panels chosen from the range of open-mesh electrofused gratings, louvred grilles or tubular railings; an extra-robust
LockMaster S4 swing gate System to LPS 1175 D10 (SR4)
CLD’s LockMaster S4 swing gates have been specially developed to blend in seamlessly with a CLD fence line. Using CLD’s Securus S4 mesh panels, LockMaster S4 offers the highest level of security-rated access control, whilst maintaining aesthetics. Rigorously tested by the Loss Prevention Certification Board (LPCB) to guarantee a minimum delay of- PRODUCT
CLD Physical Security Systems
SlideMaster SR2™ cantilever sliding gate
SlideMaster SR2™ cantilever automatic sliding gates can improve the security of access points. They carry certification to Loss Prevention Standards 1175 Security Ratings (SR1), providing a one minute delay time to physical attackers using basic tools. When greater levels of security are needed, the SlideMaster SR2 ™ cantilever sliding gate- PRODUCT
CLD Physical Security Systems
AUTOPA manually-operated double swing gate
AUTOPA's manually-operated double swing gate for commercial and industrial site entrances. Robust gate with several safety features incorporated into the design as standard. Self-latching catch post, short leading edge beam and low bottom edge, which combine to reduce the risk of the gate swinging open unexpectedly, and decrease the risk of injury
