Security posts

RetractaPost FB is a simple, cost-effective, yet highly effective way to prevent unwanted vehicle access. It is raised and lowered vertically. When lowered the post is fully below ground and covered using the integral lid. The post is padlockable (padlock not supplied) in the raised position by first rotating the post 45° and then attaching the

The Telescopic bollard range is supplied in steel, stainless steel or polyurethane elastomer. Bollards are available with a round or square profile and meets the requirement of a wide variety of security needs, from preventing access to driveways to stopping ram raid attacks. The bollards are designed with ease of use in mind. It takes seconds to

The Square RetractaPost 500 provides a simple, unobtrusive and effective means of preventing unauthorised vehicle access. The post retracts into its integrated socket when not in use and is covered by the integral lid. The post can be raised to restrict vehicle access and secured with a padlock (available separately). Suitable for commercial car

Heavy-duty mild steel security bollard with 5mm gauge. Supplied in black as standard: height: 850mm; root length: 300mm; overall diameter: 114mm. powder coating to a range of RAL/BS colours; mild steel core insert

ASF 9000LCP light column protector manufactured in 275 carbon steel from recycled sources. Ideal for lamp posts, camera posts, signs, drainpipes etc. A single hoop protects a single face and offers protection from 3 angles. Two hoops either side of a post offers 4-way protection. BIM objects available

PAS 68 Terra Venus shallow-depth static hostile vehicle mitigation (HVM) bollards are made from S355 structural steel, and impact-tested to stop a 7.5t vehicle at 30mph. Designed for shallow embedment, these static bollards suit public realm protection where minimal foundation depth is required

The Terra Neptune static counter terrorist bollard has been successfully PAS 68 impact-tested, stopping a 7.5t vehicle travelling at 40mph (64kph) which equates to 1185kJ. BSi PAS 68 static and rising bollards are required to be installed at 1200mm between upright bollard faces to meet BSi PAS 69 guidelines. Height above ground - 1000mm; diameter - 273mm

ASF building protection corner bollard manufactured in either engineering grade 250 or ductile cast iron: 100% recycled; 100% recyclable; protects building corners from vehicle damage; can be finished in any colour; logos, Lettering and coats of arms available; ASF 111 is a matching design so bollard can be used as part of a co-ordinated scheme

Can be manufactured in steel and stainless steel. Can be finished as galvanised, polished or polyester powder coated. Standard sizes are 80mm2 but can be manufactured in any standard box section size - or entirely bespoke. Manufactured in 275 carbon steel from recycled sources. BIM objects available

The Square RetractaPost 745 is a simple, cost-effective, yet highly effective way to prevent unwanted vehicle access. It is raised and lowered vertically. When lowered the post is fully below ground and covered using the integral lid. The post is padlockable (padlock not supplied) in the raised position by first rotating the post 45° and then

This Column Protector is absolutely ideal for protecting lighting columns, signs and small trees. Manufactured from 60mm diameter steel tube. Available with 2 or 3 legs. Surface Mounted or Root Fixed Material options galvanised Steel; galvanised and Powder Coated Steel; stainless Steel. root Fixed : 775mm x 650mm x 650mm; surface Mounted : 475mm x

RetractaPost-GL 500 offers a highly effective and robust way to protect premises and vehicles. It is raised and lowered vertically and is 500mm tall when raised. The 500 variant of the RetractaPost-GL benefits from a lower overall height which reduces the required excavation depth and offers a more subtle protection solution. When lowered the post

The RetractaPost-GL 745 offers a highly effective and robust way to protect premises and vehicles. It is raised and lowered vertically. When lowered the post is fully below ground and covered using the integral lid. The post is lockable in the raised position by rotating the post 45° and then pressing the high-security push-button 7-pin security

The PAS 68 Terra Quantum non-powered bollard is a side-folding retractable bollard for Hostile Vehicle Mitigation. It raises and lowers with a small footprint and encroachment of foundation. Successfully PAS 68 impact-tested, stopping a 7.5t vehicle travelling at 30mph (48kph) with zero penetration

The Black & Yellow 1500 bollard provides high-visibility protection in internal and external warehousing environments. Made from galvanised mild steel to ensure longevity, it is designed to take the knocks and bumps that occur in all warehouses: fully galvanised; coated Black with Yellow bands. 114mm - 3mm wall thickness; 139mm, 168mm, 193mm and

Autopa RGP (Removable Ground Post) is a removable security post made from galvanised or stainless steel, designed to restrict vehicle access where retractable posts are unsuitable. Locking is achieved with a 7-pin anti-drill push lock at the base. Heights above ground: 500mm, 745mm, or 900mm. Socket depth: 270mm. Wall thickness varies by diameter

Environmental Street Furniture PAS 68 tested security static bollards include surface-mount, ultra-shallow, shallow foundation and mid-depth foundation bollards: n1, N2 and N3 tested options; surface mount, shallow or mid-depth foundations; choice of diameters and finishes; unique sleeve and removable options

Anti Ram Stainless Steel Bollards are heavy-duty steel posts designed to block vehicles and protect buildings, entrances and public areas. Made from stainless steel with reinforced cores to resist impact. Options include heights, diameters, top styles, grade 304 or 316 stainless, recess cuts and reflective banding: high-security bollard to deter

Manufactured in 275 carbon steel from recycled sources. Also available in grade 304 and 316 stainless steel. BIM objects available

The CSG 10840 and 10850 bollards are designed to protect infrastructure from vehicle-borne attacks. Three products available in the static bollard range; CSG 10840 – Shallow Depth Bollard Crash Tested to 40mph: PAS 68:2007 V/7500[N2]/64/90:0/17.9; CSG 10850 – Shallow Depth Bollard Crash Tested to 50mph: PAS 68:2007 V/7500[N2]/80/90:2.8/9.8; CSG

Type 194RR is a fold-down cast iron security bollard with a below-ground coffin box housing. When not in use the bollard folds flat and sits flush within the ground box. A simple lift-and-drop action locks the bollard in the vertical position. Proven impact resistance - capable of immobilising a vehicle on impact. Interchangeable tops available to

SF Heavy Duty Round Stainless Steel Telescopic Bollard is a retractable security post made from stainless steel for controlling vehicle access. Designed for frequent use in public and commercial spaces. Telescopic design allows the bollard to be lowered into the ground when not in use. Lift assist mechanism supports easy operation. Removable and

Terra Mars static hostile vehicle mitigation (HVM) bollards are designed to stop a 7.5 tonne vehicle travelling at 40mph, tested to PAS 68 and IWA 14 standards. Made from S355 structural steel, these static bollards are suitable for high-security applications and can be finished in powder coating or stainless steel with a range of sleeve and

Manufactured in 275 carbon steel from recycled sources. Also available in stainless steel. BIM objects available