- Product name
- Solar Eye
- Shape
- Circular
- Material / finish
- Stainless steel
- Average life (hours)
- 100,000
- Light source
- LED
- Solar
- Load bearing
- Drive over
- Ingress protection
- IP68
- Dimensions (mm)
- 80 x 30mm
Solar-powered, low-profile, in-ground, 360°, high-visibility delineator, providing a strong LED signal during the hours of darkness throughout the year on footpaths, cycle paths and driveways.
Solar Eye comes with 4 lighting options: Steady White; Warm White; Bat Hat Steady White; and Bat Hat Warm White.
Steady White is a 360° high-visibility LED.
Bat Hat reduces the upward spillage of light by 98% making it a friendlier option for dark skies and wildlife conservation areas.
Operational performance has been based upon actual western European weather / sunlight - with the objective of CO2 neutrality.
Designed for cycle track and pathway installations as an economical alternative to hard wiring, Solar Eye can also be used to provide linear pathway lighting in gardens, marinas and campsites.
Standard options
Warm White 2700k
Steady White 7000k
Bat Hat Warm White
Bat Hat Steady White
Applications
Solar LED wayfinding
Cycle tracks
Pedestrian walkways
Car parks
Driveways for golf courses / country clubs
Decking areas and decorative patio lighting
Boat marinas and dock areas
Campuses and large residential areas
Caravan and camp sites
Key benefits
Constructed from durable engineering grade polymer
Low profile - nominal 6mm when installed
Easy for cyclists / vehicles to move over
Simple installation into asphalt or wooden decking
In loose stone areas, just place and push in
Long-life LFP-type battery: 8+ years anticipated
High visibility: up to 500m
LED life: 100,000 hrs
Light-sensitive auto on / off for economical operation
Independent operation – no electrical supply required
Renewable and maintenance-free green energy
Realistically priced based on market feedback
Fully sealed integrated unit - 100% waterproof
Developed in the UK
Installation service available
Technical specification
Material: high-impact, durable engineering grade polymer
Light source: LED (100,000 hrs life)
Battery: LFP-type battery (8yrs + anticipated)
Working temperature: -20 to +70 C
Body dimensions: 80mm diameter
Installed height: 6mm nominal
Milling depth: 30mm
Weight: approx. 275g
Fixing adhesive: structural 2-component moisture-tolerant epoxy
Working time after full charge: flashing 400hrs+; steady 200hrs+
Flash rate: 1 sec on , 1 sec off
Waterproof quality: IP68
High visibility: up to 500m
Questions
Can solar eye be used on roads/highways?
No – they are designed solely for pathways and cycle lanes, however they can take pressure up to 50 tons.
How do you fix the solar eye?
With an 80mm cutter 30mm deep using a moisture-tolerant epoxy fixing adhesive.
Is the solar eye suitable for conservation areas?
Yes – the Bat Hat version reduces upward light spillage by over 95%.
Does the product work all year round in the UK?
Not always - where possible, the product should be located in a south or westerly position to maximise energy.












