Seat material Steel
Planter material Timber / wood
Dimensions (mm) 1600x1600x450/700
 
 
 

The main structure of the seat-planter D-PLANTER is in galvanised and polyester powder coated steel (or Corten treated with an oxidation cycle), thickness 20/10. D-PLANTER consists of a central planter, Ø 800 mm H 700 mm, and four semi-circular seats placed at 90 degrees of the planter and fixed to the latter with hexagonal M8 screws. The four seats are covered with solid and exotic multilayer-wood panels, T. 30 mm, treated with natural waterproof oils. The wood seats are fixed to the bearing structure with M6 screws and afterwards coated with stucco of the main colour of the wood used. Within each semi-circular seat, two steel EN10111DD11 plate, T. 30/10, are welded to the base with M10 holes for the ground fixing. All fixings are in stainless steel AISI 304.

Max dimensions:

Length: 1600 mm
Width: 1600 mm
Height of the seat: 450 mm
Height of the planter: 700 mm
Planter diameter: 800 mm

Material: steel and wood


The main structure of the seat-planter D-PLANTER is in galvanised and polyester powder coated steel (or Corten treated with an oxidation cycle), thickness 20/10. D-PLANTER consists of a central planter, Ø 800 mm H 700 mm, and four semi-circular seats placed at 90 degrees of the planter and fixed to the latter with hexagonal M8 screws. The four seats are covered with solid and exotic multilayer-wood panels, T. 30 mm, treated with natural waterproof oils. The wood seats are fixed to the bearing structure with M6 screws and afterwards coated with stucco of the main colour of the wood used. Within each semi-circular seat, two steel EN10111DD11 plate, T. 30/10, are welded to the base with M10 holes for the ground fixing. All fixings are in stainless steel AISI 304.

Max dimensions:

Length: 1600 mm
Width: 1600 mm
Height of the seat: 450 mm
Height of the planter: 700 mm
Planter diameter: 800 mm

Material: steel and wood


Interested in this product?
Call 0114 282 1283
OR
 
 
 
Downloads
  • D-Planter By LAB23 tech spec
    D-Planter By LAB23 tech spec
    286.26KB
    Download
 
 
 
Enquire
 


Related entries

  • All Urban: Quaddy planter and seating unit by LAB23
    Quaddy planter and seating unit by LAB23
    All Urban
    The structure of the planter QUADDY is made of modules in steel 15/10 and 30/10 thickness, joined together with M8 screws. In the middle of the load-bearing structure there is a planter 15/10 thickness with dimensions...
  • All Urban: Al Ain Bench Planter By LAB23
    Al Ain Bench Planter By LAB23
    All Urban
    The bench-planter AL AIN is made in steel 15/10 thickness. The structure is pyramid-shaped with a square base, the band of the upper part is calendered with a radius of 160 mm. Inside the planter there’s a support structure...
  • All Urban: Curly Planter By LAB23
    Curly Planter By LAB23
    All Urban
    Fiber-reinforced composite material made of a polyester resin and marble powder particularly resistant to wear and to atmospheric agents. Scratches and accidental damages can also be easily repaired thanks to the appropriate...
  • All Urban: Neck planter with seating by LAB23
    Neck planter with seating by LAB23
    All Urban
    The NECK planter is made in steel 30/10 thickness. To obtain the peculiar conical shape characterizing the planter, the steel sheets go through a specific calendering and are later welded through continuous welding. On the...
  • All Urban: Aveo Planter with Bench Seating By LAB23
    Aveo Planter with Bench Seating By LAB23
    All Urban
    Description: The outer part of the Aveo bench is made in hypergranite, fiber-reinforced material made in polyester resin and marble powders, particularly resistant to wear and atmospheric agents. Hypergranite is available in...
Not found what you're looking for? View other options

Ask All Urban about

D-Planter By LAB23