Security rated fencing systems

HiSec Super 6 is a high-security perimeter mesh fencing system made from 6mm vertical and 4mm horizontal steel wires, designed to protect critical infrastructure and sensitive sites. Certified to LPS 1175 A1 (SR1), it supports CCTV visibility

Securus-Lite™ flat panel fencing is a cost-effective anti-climb system. Each hard-wearing mesh panel is fixed to galvanised steel square posts using slim yet sturdy full-length clamp bars and strong through bolts. This ensures quick and easy installation around any perimeter and maintains a great defence against any potential intruders: 76.2 x

Dulok S1 is an A1 security rated twin wire rigid mesh panel fencing system. Panels are made by welding two 8mm wires either side of 6mm vertical wires to form a 200x50mm mesh aperture. Certified to LPS 1175 A1 (SR1) Security Ratings, Dulok S1 provides perimeter security for public, industrial and commercial buildings: 200 x 50mm Mesh Apertures

CLD manufactures a range of data centre fencing and gate solutions that offer the highest level of protection with guaranteed delay against attack while providing the following features: tested to LPS 1175; Secured by Design; anti-climb protection mesh with additional security toppings; guaranteed minimum delay times of 1 to 3 minutes

Securus Lite SR1 is an in-ground security fencing system made from 358 rigid mesh panels, designed for permanent perimeter protection where resistance to opportunistic attacks is required. Certified to LPS 1175 SR1 Issue 7 and Secured by Design accredited, it delivers a minimum 60 second delay against attack and is suitable for a range of

Securus S1™ rigid steel wire mesh panel fencing provides perimeter security for schools, police stations, utility suppliers and airports. The 358 anti-climb mesh fencing panels are fixed to steel posts with a solid clamp bar for added security. Securus S1 is certified to LPS 1175 A1 (SR1) to withstand basic tool attacks, and is approved for

Barkers’ SecureGuard™ RCS is the only standalone PAS68 accredited mesh fence, tested to stop a 7.5t vehicle at 30mph and builds on the success of the palisade version – StronGuard RCS. Secures data centre sites; protects rail networks from road vehicles getting onto the tracks; various military and critical national infrastructure sites

Securus™ is a 358 mesh high-security flat panel-and-post fence system that provides security and rigidity without compromising on the aesthetic appeal of mesh systems. Small aperture anti-climb 358 welded mesh. Heights 1830, 2030, 2440, 3000mm as standard, up to 5.2m to order. LPS 1175 A1 to D10 security-rated options

EuroGuard®Flatform Heavy A1 security rated fencing system provides a welded mesh alternative to vertical railings. Featuring a flat profile with heavy gauge twin horizontal wires for added rigidity and resistance to cutting. It is ideal for applications requiring a combination of visibility and security. It can be installed quickly, at a low cost

SolarGard Titan is a high-security fencing system made for solar farm perimeters. With tightly spaced single wire mesh panels and an LPCB SR1 security rating. Designed to prevent climbing and cutting, it meets UK police and insurance guidelines and includes wildlife access gates for environmental protection: high-security mesh fencing system for

Euro Guard® Combi LPS 1175 SR1 fencing features a design that combines natural wooden slats with the strength of steel mesh. The combination of robust welded mesh panels and closely spaced, substantial timber slats provide a flat facing surface with no foot or hand holds: LPS 1175 approved; secured by Design; SR1 gates available; jakcure® treated

SolarGard Aurora security rated fence system is made for solar farm perimeters. It uses overlapping mesh wire panels for high security and durability. LPCB SR1 certified, resists forced entry with basic tools and meets UK police and insurance standards. Supplied in RAL 6005 Moss Green or RAL 9005 Black, with marine powder coat for coastal sites

Protek® 358 Elite by Alexandra Security is a high-security flat panel mesh fence system made for perimeter protection where resistance to forced entry is required. Approved to SR1/A1 standard by LPCB, it uses tight mesh spacing to deter climbing and cutting, and is made in heights from 1.8 to 3m. Matching gates are also available

HiSec SR1 (A1) Rated Fencing from Zaun is a perimeter security fence system made from 358 welded mesh with a 76.2 x 12.7mm aperture, designed for high-security sites needing Secured by Design accreditation and certified to LPS 1175 SR1 (A1). Mesh panels are available in multiple heights and are fixed with stainless steel tamper-resistant fittings

HiSec 358 security fencing system from Zaun is a welded mesh perimeter fence designed for high-security applications, using a 76.2 x 12.7mm mesh pattern to prevent climbing and intrusion. Panels reach up to 7 metres in height, with matching pedestrian and vehicle gates, and are suitable for integration with CCTV and security enhancements: welded

Dulok 25 S1 double wire rigid mesh fencing system has twin 8mm horizontal wires and 6mm vertical wires. The 200x25mm mesh size is difficult to cut through making Dulok 25 S1 suitable for use in data centres, secure units, MOD sites and police stations: anti-cut-through, double wire panels; 200x25mm mesh; fence heights from 1830 to 5070mm; LPS 1175

Cost-effective, rigid mesh fencing using durable TwinGuard 868 mesh panels for moderate-risk security sites. Security tested to withstand experienced attack with basic hand tools for over 60 seconds. Easy to install. Heights from 1.8 to 3m

CLD RamPro 50 is a heavy-duty hostile vehicle mitigation (HVM) fence system made from steel, independently tested and certified to LPS 1175 (A1 to D10) and ISO 22343-1:2023, designed to stop a 7.5-tonne vehicle at 50 mph and compatible with CLD mesh panel ranges: high-security fencing system with integrated hostile vehicle mitigation; certified to

CLD RamPro 30 is a high-strength hostile vehicle mitigation fencing system designed to protect critical infrastructure from forced entry and vehicle attacks, independently tested to LPS 1175 (A1 to D10) and ISO 22343-1:2023, and capable of stopping a 7.5-tonne vehicle at 30 mph: high-security fencing system for hostile vehicle mitigation

Ultimate Extra S1 is a profiled, security-rated, rigid mesh panel fencing system. Designed to provide a high-level perimeter security, Ultimate Extra S1 has been certified to provide a minimum of 60 seconds delay against attack. Difficult to cut and climb. Tight mesh aperture. No external fixings, Nominal heights 2.0, 2.4, 3.0m

Rampart 50 is a shallow foundation high security fence system with integrated hostile vehicle mitigation (HVM). Rampart 50 has been rated to IWA 14-1:2013 which means it can stop a 7.2 tonne vehicle moving at 50 miles per hour (80 kilometres per hour). The system can be used with any of CLD’s Securus S1, S2, S3 or S4 fence panels depending on

Protek® 868 Elite from Alexandra Security is a mesh perimeter fencing system made from double horizontal and single vertical wires, tested and approved to LPCB SR1 standard for resistance to forced entry using basic tools for up to 1 minute. Suitable for security-critical sites, it is supplied in heights from 1.8 to 3m, with galvanised and

StronGuard™ SL1 deterrent security fencing has been tested by the LPCB to LPS1175 A1 (Previously SR1) under Issue 8 and BS 1722 pt 14 standards to prevent an opportunist attacker with bodily force and basic tools from gaining access for more than 60 seconds. This palisade security fencing delivers the classic visual deterrent and ease of install

SecureGuard SL1 is a high-security fencing system that uses SecureGuard 358 mesh and has been tested by the LPCB to LPS 1175 A1 (SR1). SecureGuard SL1 provides resistance against attack by bodily force or basic tools for over 60 seconds. It helps mitigate unauthorised access and vandalism and provides good visibility to aid CCTV and security