- Product name
- Ultimate Extra S1
- System type
- Rigid mesh systems
- Product accreditation
- BS 1722-14
- LPS 1175 Security Rated
- SR1 A1 LPS 1175
- Secured by Design
- Fence height
- Nominal heights: 2.0, 2.4 or 3.0m
- Panel width
- 2475mm for 2.0, 2.4m-high
- 2050mm for 3m-high
- Aperture size
- 165 x 25mm
- Wire / bar diameter
- 6mm
- Post sections
- RHS 80 x 40 to 120 x 60mm, depending on height of panel
Ultimate Extra S1 is a profiled, security-rated, rigid mesh panel fencing system. Designed to provide a high-level perimeter security, it has been certified to provide a minimum of 60 seconds delay against attack.
Features
Profiled rigid wire mesh fence panel
Difficult to cut and climb
Tight mesh aperture
No external fixings
LPS 1175 A1 (SR1) Issue 8
Secured by Design
Full range of RAL colours
Applications
Ministry of Defence sites
Police stations
Secure units
Utility suppliers
Industrial buildings
Public buildings
Airports and seaports
Dimensions
Heights
2030, 2430, 3030mm
Panel width
2475mm (up to 2430mm)
2050mm (3030mm)
Mesh size
165 x 25mm
Wire diameter
6mm
Profiles
4 or 5 as required
Top edge projection
25mm (can be inverted for flush edges)
Posts
80 x 40mm RHS to 120 x 60mm depending on panel height
Clamping channels
41 x 21mm
Post centres
2485mm (up to 2430mm)
2060mm (3030mm)
Finish
Panels are galvanised and polyester powder-coated after stringent cleaning and treatment to give a well-adhered coating of 60 microns.
Sloping ground
Panels can be stepped as required. Where gradients exceed 1:16, it is recommended that taller panels are either part-buried or additional posts are used.
Variations
In addition to the standard posts many variations are available to accommodate site requirements:
Alternative sections
Wall fixing plates, cranked posts or base-plated
Cranked or straight extensions for barbed or razor wire
Cranked panels
Accreditation
Secured by Design
Certified to Loss Prevention Standards 1175 Security Ratings (SR1)
Conforms to BS 1722: Part 14














