Dulok 25 S1 double wire rigid mesh fencing system has twin 8mm horizontal wires and 6mm vertical wires.

The 200x25mm mesh size is difficult to cut through making Dulok 25 S1 suitable for use in data centres, secure units, MOD sites and police stations.

  • Anti-cut-through, double wire panels

  • 200x25mm mesh

  • Fence heights from 1830 to 5070mm

  • LPS 1175 Issue 8 A1 certified

  • Secured by Design accredited

  • Conforms to BS 1772-14

Applications

  • MOD sites

  • Police stations

  • Secure units

  • Data centres

  • Power stations

  • Utility providers

  • Industrial and commercial sites

Dimensions

Heights
1830 to 5070mm
Heights of 3030mm and above are made up of 2 or more panels.

Top Edge Projection
30mm (can be inverted to give flush edge)

Wire Diameter
Twin 8mm horizontals
Single 6mm verticals

Mesh Size
200 x 25mm

Top Edge Projection
30mm (can be inverted to give flush edge)

Panel Width
2508mm

Posts
80mm x 40mm to 120mm x 60mm depending on height of panel 

Post centres
2518mm

Panels are fixed to posts using Sheardrive security bolts rather than pin hex screws for increased security.

Clamping Channel
40 x 5mm Steel

Finishes

  • Hot dip galvanised only or galvanised and polyester powder-coated

  • Standard colour is Green RAL 6005

  • Other RAL colours to order

Features

Sloping ground

Panels can be stepped as required within the clamp bar system. Where gradients exceed 1:16, it is recommended that taller panels are either part-buried or additional posts are used.

Variations

  • Wall fixing plates, cranked posts or base plated

  • Cranked or straight extensions for barbed or razor wire

  • Cranked panels