Ketley Tenger pavers are produced at Ketley Brick Company's works located in the heart of the Black Country where pavers  have been made from our own Etruria Marl since Victorian times.  Their unrivalled physical properties include their strength, durability and permanence of colour.

Clay pavers should be laid by hand, commencing from a straight starting edge on the prepared bedding course. They should be laid slightly open to provide a finished joint width between pavers of approx 2-5mm beyond the edge protection nibs to permit infill and to minimise damage in compaction and subsequent use. Failure to do this may result in chipping of the clay pavers.

The Ketley Brick Company are excited to present their brand new range of Tenger clay pavers,  Staffordshire clay pavers with a contemporary slim format.  They are similar in size to dutch pavers, but these are made in our factory in Brierley Hill in the UK and unlike the dutch pavers which tend to have tumbled edges, Ketley Tenger pavers are sharp edged and extremely hardwearing.  They are made of the same Etruria marl clay as the rest of the Ketley range (which we extract from our local quarry) and have the same characteristics of extremely low water absorption and very high strength.   They are ideal for all domestic and commercial landscaping applications including pathways, driveways, patios  and public realm and  can withstand both heavy footfall and vehicular traffic.  Their dragfaced texture has excellent anti-slip properties.

They are available in the 3 traditional, rich, Staffordshire clay colours which will not fade over time, but will last for future generations.  They can be used alongside our Classic or patterned paver range to delineate areas of outdoor space.Ketley pavers can be supplied with or without nibs.  (Please note the nibs are there for edge protection of the pavers and are not spacer nibs, therefore the nibs should not be used to determine the gaps between pavers).  If deviation from the bond pattern does occur, the pavers can be adjusted to open the Joints to about 5mm. This process is known as gapping. A small percentage outside this figure will not affect paver performance.

Features

  • Unpolished Slip/Skid Resistance

  • Abrasion Resistance

  • Freeze/Thaw Resistance

Colour options

  • Staffordshire blue

  • Staffordshire brown

  • brindle

  • red

Ketley Brick have a long history producing special bricks and pavers.

Clay pavers should be laid in accordance with BS 7533-3:2005+A1:2009.

Ketley Brick also offers a made to measure service for bespoke requirements, this is covered in the Special Shapes section.