Ninja Frame Lichtenhaeger multi play unit consists of:

  • frame made of squared stainless steel

  • 4 climbing passages, lined up and connected by frames

  • length: 2935cm x width: 210cm x height: 300cm

  • horizontal beams with planks made of robinia on each frame

  • 1 pair of handles attached to each frame, aligned inside

  • 4 climbing ropes with rings made of stainelss steel

  • 3 swinging timbers, attached to climbing ropes and chains

  • 4 rope ladders with stainless steel bars, aligned transversely

  • 1 balance rope, length approx. 200cm

  • several small climbing platforms made of robinia, mounted on stainless steel posts in different heights

Technical information

All support posts made of squared stainless steel tube 120x120mm.
All stainless steel surfaces are radiated with glass marbles according to environmental protection rules.
All wooden parts made of Robinia, planed and chamfered. All wooden parts are untreated..
Connection point net/rope with support posts through specifically formed stainless steel fork and tensible stainless steel chain.
Ropes/nets made of Hercules rope.
All connecting parts made of stainless steel or galvanized. Use of self-locking nuts only.

Drying cracks are normal in all native hard woods, also after appropriate storage and professional treatment. Therefore drying cracks do not justify a warranty claim. (cf supplementary sheet to the German Institute for Standardization EN 1176, Note on 4.2.7.6)