The sitting for walls MOKO, available in three different compositions is composed of a series of wooden profiles of equal length but of different widths (20 mm, 40 mm, 80 mm ) useful to fully satisfy the curves and the flat portions of the bench , reclining so perfectly in every point and making the session very comfortable .

– MW1 is sitting flat consists of 4 strips of 80 mm width.
– MW2 is realized by a flat part composed of slats 4 by 80 mm width and a front curve consists of three slats of 20 mm width.
– MW3 is realized by a flat part composed of slats 4 by 80 mm width and a front curve consists of three slats of 20 mm width and a low backrest consists of one slat 40 mm and a slat 80 mm.

Two side legs, made ??of steel, placed on the ends of the bench, close the structure, lead profiles and serve as the anchor.

MOKO WALL SEAT ECO was developed thinking about the environment, recycle and minimization of production processes. Just in a word: sustainability. The structure of the bench is made of galvanized steel without any further coating process.

Seat and back are made of a series of profiles PVC foam and wood flour. A recycled material, 100% recyclable, flame retardant and resistant to corrosion caused by external agents, “Plastica Seconda Vita” certified.

Designer: GIBILLERO Design

Max dimensions

  • MW1 dimensions : 1800 x 415 x 40 mm h

  • MW2 dimensions : 1800 x 492 x 100 mm h

  • MW3 dimensions : 1800 x 573 x 256 mm h