Type In situ wet pour
Suitability Playgrounds
Finishes Coloured
Flecked
Graphics
Patterned
Services Sub-base construction
Installation
Company affiliations Constructionline
 
 
 

Wetpour Rubber Crumb is a play surface made of granulated rubber crumb, ideal for surfaces requiring impact protection such as playgrounds and play areas.

The surface has passed the most comprehensive testing criteria which includes critical fall height, flammability, indentation and abrasive wear. It also allows for a huge choice of colours, shapes, and play features, including mounds to be sculptured.

Our highly skilled installation teams can replicate virtually any design, logo or pattern.

Build up

Wetpour is often installed onto a prepared hard surface, such as stone (MOT) or macadam. The sub-base should be dry, level and compact all over, and any deviations should be such that when a 3m long straight edge is placed in any position on the surface, the gap between the straight edge and the surface shall at no point be greater than +/-6mm.

Maintenance

All Wetpour Surfacing should undergo routine and operational inspection and maintenance in accordance with the recommendations of EN 1176.

The frequency of inspection will vary with the type of equipment used and other factors such as heavy use, levels of vandalism, coastal location, air pollution, age of equipment, location adjacent trees.


Wetpour Rubber Crumb is a play surface made of granulated rubber crumb, ideal for surfaces requiring impact protection such as playgrounds and play areas.

The surface has passed the most comprehensive testing criteria which includes critical fall height, flammability, indentation and abrasive wear. It also allows for a huge choice of colours, shapes, and play features, including mounds to be sculptured.

Our highly skilled installation teams can replicate virtually any design, logo or pattern.

Build up

Wetpour is often installed onto a prepared hard surface, such as stone (MOT) or macadam. The sub-base should be dry, level and compact all over, and any deviations should be such that when a 3m long straight edge is placed in any position on the surface, the gap between the straight edge and the surface shall at no point be greater than +/-6mm.

Maintenance

All Wetpour Surfacing should undergo routine and operational inspection and maintenance in accordance with the recommendations of EN 1176.

The frequency of inspection will vary with the type of equipment used and other factors such as heavy use, levels of vandalism, coastal location, air pollution, age of equipment, location adjacent trees.


 
 
 
Downloads
 
 
 
Enquire
 

Related entries

  • Wetpour and rubber mulch surfacing for primary school
    DCM Surfaces
    Wet pour surfacing and rubber mulch were used to create a colourful, playful environment at Kings Oak Primary School where children are able to run around and explore a safe and secure space. A variety of graphics was installed...
  • DCM Surfaces: Rubber safety surfacing and graphics for Green Flag park
    Rubber safety surfacing and graphics for Green Flag park
    DCM Surfaces
    Rubber safety surfacing was provided by DCM Surfaces for a playground facility at Capstone Farm Country Park in Kent. The farm contains a variety of habitats including ancient woodlands, old orchards, a freshwater lake, meadows...
  • DCM Surfaces: Wetpour play surface for Canary Wharf Rooftop Terrace
    Wetpour play surface for Canary Wharf Rooftop Terrace
    DCM Surfaces
    DCM Surfaces installed Wetpour onto the Rooftop Terrace at Burdett Road in Canary Wharf. The affordable housing project, which rises from 7 to 11 stories, included the development of 56 residential units, amenity space, cycle...
  • DCM Surfaces: Highly graphical play area surface at Fosse Park
    Highly graphical play area surface at Fosse Park
    DCM Surfaces
    DCM Surfaces were delighted to work on this project at Fosse Park, Leicester to create a highly graphical safe surface for this play area. The design, which was selected following a competition from local artists, incorporated...

Also by DCM Surfaces

DCM Surfaces address and contact details

D C M Projects Ltd
Wigan Road
Leyland
PR25 5XW
Tel: 01772 440340
View on map
 
Follow DCM Surfaces
 
Not found what you're looking for? View other options