Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Bypass separators
Bypass separators - helping you find the best solution for your project.
ACO Q-Ceptor - polyethylene bypass oil separator
Bypass separators are used when it is acceptable not to fully treat high flows, typically in areas where there is a small risk of spillage, such as short stay car parks. The separator treats all flows generated by rainfall rates of up to 6.5mm/h. High flows above this level are allowed to bypass the separator: Compliant with the
Cowens Class 1 By-pass range provides a high level of hydrocarbon removal at normal flow rates while higher flow rates by-pass the main chamber thus preventing contamination of increased flow. Their unique vertical design dramatically reduces the tank foot print and therefore the civils excavation costs. This separator is generally recommended for
Klargester's Bypass Separators provide the ideal solution for low risk floods, when there is little possibility of a combined heavy rainfall and large spillage. Bypass separators fully treat all flows generated by rainfall rates of up to 6.5mm/hr. This covers over 99% of all rainfall events. Flows above this rate are allowed to bypass the- PRODUCT
- Kingspan Water & Energy
Bypass separators - helping you find the best companies for your project.
ACO Water Management
ACO Q-Ceptors are made in a range of chamber sizes and flow rates for use in car parks, maintenance areas, and industrial and residential applications
ACO Business Park, Hitchin Road, Shefford, SG17 5TEAllerton
Sales, servicing, commissioning and repairs of interceptors and separators for wastewater sewage schemes for up to 2000 people
Woodbridge Road, Sleaford, NG34 7EWAluline
59-62 Brindley Road, Astmoor Industrial Estate, Runcorn, WA7 1PFCowens
Ellers Mill, Dalston, Carlisle, CA5 7QJKingspan Water & Energy
180 Gilford Road, Portadown, Craigavon, BT63 5LFNorth Eastern Composites
Manufactures and supplies the Tony Bartle designed Euroceptor bypass separator and Superceptor full retention separator. Both separators are type tested to the European standard BS EN 858-1 and are fully compliant with Environmental Agencys guidelines (PPG3
Unit 3 Rhodes Court, South Nelson Road, Cramlington, NE23 1WFOaklands Environmental
Bypass separators are designed to act as oil and silt separators in rainwater management; their effectiveness is dependent upon the efficiency and quality of their enclosed filtering system
Station Road, Coleshill, Birmingham, B46 1HTPremier Tech Water and Environment
Supplies full-retention and bypass separators designed to BS EN 858-1 and -2. Full-retention separators are suitable for high risk areas such as fuel storage depots and petrol forecourts, whilst bypass models are suitable for low risk areas such as car parks, roadways and hard standings
2 Whitehouse Way, Peterlee, SR8 2RASILOTANK
SILOTANK's range of bypass separators are used where the risk of a large spillage and heavy rainfall occurring at the same time is small and it is deemed that full treatment of very high flows is not necessary
Loop Road, 4 Springbank Road, Dunmurry, Belfast, BT17 0QLSPEL Products
SPEL fuel / oil separators, including full retention and by-pass Class 1 and 2 separators, meet BS EN 858-1 and are fully compliant with the Environment Agencys Pollution Prevention Guideline PPG3 and the Construction Products Regulations
Lancaster Road, Harlescott, Shrewsbury, SY1 3NQ
