Timber bridges

High Country Bridges High have a flat, no-nonsense design. The characteristic Rough&Ready beam (7x15 cm - 2.8"x5.9") rests on industrial hot-dip galvanised posts. The beam is made from FSC hardwood or the TWIN material All Black. Stainless steel cables are spanned in parallel underneath the beam to retain a sleek profile. A mesh of stainless steel

Woodscape's bridges are engineered and manufactured in Naturally Very Durable Hardwood to exacting standards. Footbridges and light vehicular access bridges have single spans up to 16 metres – longer bridges are possible using multiple spans and supports. Bridges are available with a variety of balustrade designs as standard. Infill options

CTS produces kit bridges in hardwood or softwood and with FSC accreditation. They provide an inexpensive, low-maintenance and vandal-resistant option where budgets are tight and access is difficult. Standard length - 2.7-11m; standard width - 450, 825, 1200 and 1500mm; other widths available up to 4m; non-standard sizes and installation service available

Big Suspension Bridge is a large-scale suspension bridge designed for play areas, encouraging dynamic movement and interaction. Made from materials that create a swinging effect and an open, visually striking structure. Intended for use by schoolchildren and young people in both supervised and unsupervised public spaces: large suspension bridge

The Bowie Bridge was inspired by the David Bowie song ‘Wild is the Wind’. The continuous fencing system of criss-crossed balusters is uninterrupted by posts. Round stainless steel bars have alternating diameters (max 30mm), resulting in a robust and rigid fence. This fencing was specifically designed to prevent the possibility of users getting

Timber bridges can be made from solid hardwood or softwood, dowel-laminated hardwood, or glue-laminated hardwood or softwood. All timberwork is designed to BS 5400 and BS 5268 or Eurocode 5 with a design live load of 5kN/m2. CTS holdS an FSC certificate for the supply of bridges made with FSC-certified material. Available in kit form

CTS Bridges produces a comprehensive range of railway bridges in steel, timber or FRP, manufactured under quality controlled conditions. Matching ramps, staircases and lift shaft cladding are also provided. CTS offers an installation service for all of its bridges and structures, over weekends or during night-time closures as necessary. The team

The Twisting Bridge fencing system consists of diagonally set, twisted guard bars. A varied setting angle creates a vivid image when viewing or passing alongside the railing. The fencing has a small opening size of up to 100 mm - 4". Twisting fencing can be made from steel KTL powder coated, blasted stainless steel or untreated CorTen, in

Ornamental bridges are exclusively designed to suit parks, gardens and estates and have been supplied to many private clients, hotels, National Trust, large estates, golf clubs, leisure parks, universities and public parks. Bridges can be made in softwood, hardwood or steel, or a comination of materials. FSC timber is available. CTS offers

The Ona Bridge features a continuous balustrade with a dynamic graphic design created from CorTen or powder coated steel strips. The continuous balustrade is topped with an FSC hardwood handrail. The Ona Bridge can be flat or slightly arched with a maximum span of around 16 m - 52 ft. Standard widths are 2 or 3 m - 6.6 or 10 ft. This is a

CTS Bridges has extensive experience in the design, manufacture and installation of cycleway and bridleway footbridges. The company designs and fabricates these bridges in a variety of styles including all-timber, all-steel, or combinations of steel and timber. The most suitable material depends on the length of bridge required and CTS can give

The most economic solution to bridging a small stream or dip for occasional pedestrian use is a small kit bridge. The Wooden Bridge Company supplies flat-packed self-assembly kit bridges with detailed instructions and a drawing. They are easy to transport into remote locations and are quick and simple to erect. Installation service available

Bridleway Bridges are made for equestrian routes, with hardwearing, slip-resistant decks that reduce noise to avoid frightening horses. Parapets are usually 1800mm high with close-boarded lower sections, but lower, visually lighter parapet options are available to suit client preferences: bridge for bridleways with horse-friendly design

Timber bridges offer a lower cost solution when relatively short spans are needed and for lighter vehicle traffic. The Wooden Bridge Company's can design and manufacture bridges with skews. The company discusses clients' needs with them early in a project and can often offer suggestions to solve issues in a more economic manner

Cycleway Bridges are wider than standard pedestrian bridges and include parapets at 1400mm height. Designed to carry a live load of 5kN/sq m, these bridges meet crowd loading criteria. Deck surfaces can be treated with anti-slip finishes to improve traction: wider bridge design for cycleway use; parapet height set at 1400mm for added safety

Countrywide Access is a family-owned business based in rural Cheshire, whose aim is to provide clients with the best value bridges available in the UK. The company recommends a minimum width of 1.5m for cycle bridges. These bridges usually have a 4-rail parapet which the company can fit to any of its standard range: we believe there is no place

Countrywide Access is a family-owned business based in rural Cheshire, whose aim is to provide clients with the best value bridges available in the UK. There are unique requirements for bridleway bridges and it is best to discuss this early in a project: we believe there is no place for plastics in the environment and do not offer bridges made

Countrywide Access is a family-owned business based in rural Cheshire, whose aim is to provide clients with the best value bridges available in the UK. Pedestrian bridges come in standard widths from 800 to 2000mm. However, many other widths are available as non-standard: we believe there is no place for plastics in the environment and do not

Pedestrian bridges made from hardwood or softwood, designed for a live load of 5kN/sq m and compliant with Eurocodes and Crowd Loading Criteria. Supplied in a wide range of widths and lengths, with kit form or full installation options. Design certificates signed by Chartered Engineers are routinely issued. Multiple parapet and deck treatments

Biking Trail Bison Bridge Kit is a bridge system designed for cycling trails, with angled parapets that create space for cyclists and prevent obstruction. Quick to install and built for long-term outdoor use: bridge kit for cycling trails; angled parapets create space for handlebars; discourages pedestrian obstruction on the trail; quick and easy

Timber pedestrian, bridle and cycle bridges from Bison have 3 steel structural beams with Redwood deck boards, parapets and handrails. Supplied in kit form, they are designed for ease of installation and as a long-life bridge solution. Span - 3-12m; regular widths - 800, 1200, 1800, 2400mm; crowd loading - 5.0kN per square metre; non-slip inserts

Timber pedestrian bridge kits are suitable for parklands, estates and rural Public Rights of Way. They are made from three galvanised steel beams with redwood deck boards, parapets and handrails, supporting single spans up to 12m