EKOedge general-purpose, value-for-money plastic wood edging is suitable for all landscaping projects. It creates a long-lasting, rot-free divider between two landscaped areas or surfaces and can be installed around the perimeter of pathways, ponds, driveways or used as garden edging.

Installation

EKOedge is partially buried and secured firmly in the ground using EKOedge stakes. Lay out the EKOedge where the edging will ultimately go. Rolled EKOedge will then unroll itself. Dig a small trench and lay the EKOedge in it. Preferably put a minimum of two-thirds of the EKOedge in the ground. Use a rubber hammer to pound the EKOedge stakes into the ground. The H profile guarantees high stability. The stakes are approximately 3cm lower than the top of the EKOedge and will not be visible when the installation is complete. Depending on the intended use, install the stakes at least every 50cm. Secure the EKOedge to the EKOstakes using stainless steel screws (2 per stake). A spirit level is useful in creating an even result. Fill in the side of the garden border using soil, wood mulch, stones.

EKOedge pond edging

A solution for sustainable pond edging that's virtually invisible. It is vital that the EKOedge is perfectly level. It actually determines the maximum water level. Pound the EKOedge stakes into the ground and secure the EKOedge to the stakes. Lay a protective membrane in the pond and over the edge of the EKOedge. This membrane protects the pond liner from friction and sharp objects in the ground. Lay the pond liner so that it also comes over the edge of the EKOedge and finish it neatly on the outer edge.

EKOedge rolled: 0.70mm x 140mm x 25m (l)
EKOedge stakes: 380mm long

Material:

Our furniture and lumber profiles are made from 100% recycled mixed waste plastics. A mixture of agricultural film, along with other high quality plastics which have been traditionally sent to landfill.