Addagrip 1000 System is a concrete airfield repair and protection system made from deep-penetrating resin and high-performance aggregate, designed to seal, strengthen and improve skid resistance on runways, taxiways, stands and concrete roads.

Resin penetrates 2–3mm into prepared concrete, stabilising the surface and sealing against moisture. Surface incorporates selected Quartz or Emery aggregates in gradings from 0.5–2mm for a durable, textured finish.

Application uses hot compressed air to clean and open pores before resin is applied, allowing rapid installation and minimal disruption. Extends pavement life by 10–20 years and reduces foreign object debris risk.

  • Specialist system for repairing and protecting concrete airfield pavements

  • Penetrating resin treatment seals and stabilises concrete surfaces

  • Improves skid resistance with selected Quartz or Emery aggregates

  • Addresses spalling, small cracks and deeper surface damage

  • Reduces risk of foreign object debris on airfields

  • Quick installation with minimal downtime using hot compressed air preparation

  • Extends service life by 10–20 years

Applications

  • Runways, taxiways, aircraft stands and concrete roads on airfields

Dimensions

Quartz aggregate gradings: 0.7–1.2mm, 0.8–1.4mm

Emery aggregate gradings: 0.5–1.0mm, 0.5–1.5mm, 0.8–1.7mm, 1–2mm

Materials

Deep-penetrating resin

Quartz or Emery aggregate

Finish

Textured, hard-wearing surface

Colours

Natural and coloured aggregates including neutrals, bronzes, greys

Performance

Extends pavement life by 10–20 years

Improves skid resistance for wet and dry conditions

Installation

Surface prepared with hot compressed air to remove contaminants and open pores

Resin applied by roller or squeegee, followed by aggregate broadcast

Suitable for rapid installation on live airfields