- Product name
- RootBridge®
- Loading
- Pedestrian traffic
- Light vehicular traffic
- Heavy vehicular traffic
- Applications
- Car parks
- Cycle routes
- Driveways
- Footpaths
- Length (mm)
- As required
- Width (mm)
- As required
- Depth (mm)
- 75
- Load (kN)
- 3.5
- 15
- 50
- 57
RootBridge® System is a load-supporting steel lattice framework designed to protect tree root zones during construction by preventing soil compaction and root damage. Made for use in root protection areas, it bridges over roots to allow paving or access without harming trees, supporting loads up to 30 tonnes with minimal structure height. Available in variants for pedestrian, light vehicle, and heavy vehicle use.
Steel framework bridges over tree roots to prevent soil compaction
Supports dynamic loads up to 30 tonnes
Low structure height of 75mm requires minimal excavation
Maintains natural water and air flow to roots
No concrete within the sensitive root range
Can be retro-fitted into new developments
Suitable for pedestrian, light vehicle, and heavy vehicle applications
Applications
Integrating existing trees into new developments
Paving or constructing access roads over root protection areas
Driveway and pathway construction near mature trees
Urban landscaping projects requiring tree preservation
Housing and commercial developments with protected trees
Dimensions
RootBridge is a modular system that can be shaped and sized to plan.
Longitudinal beams: 2 x 1m or 1 x 1m
Grids: 1 x 1m
Foundational screws: 2m long
Performance
Supports axle loads from pedestrian use up to 11 tonnes
Dynamic load capacity up to 30 tonnes
Materials
Steel lattice framework with mesh grids
Steel foundation screws
Installation
Installed by inserting foundation screws between the roots, up to approximately 2m into the soil, without damaging the roots.
The final surface finish of steel mesh grids can, if required, be overlaid with block paving, asphalt or resin bound.
Options and variations
Pedestrian, light vehicle, and extra heavy vehicle variants
Compliance
BS EN 1990:2002 - Eurocode 0, Basis of Structural Design
BS EN 1991 - Eurocode 1, Actions on Structural
BS EN 1993 - Eurocode 3, Design of Steel Structures
BS EN 5837:2012 - Protection of Tree Roots














