Safeogril rigid open mesh fencing system is a strong steel grating design with heavy duty anti-cut panels. It provides an architecturally pleasing boundary demarcation without compromising the inbuilt security features.

  • Steel grating design

  • Heavy duty anti-cut panels

  • Good visibility

  • Safe and secure

  • Galvanised & powder coated in any RAL colour or galvanised only

  • 62 x 132mm Open Mesh Apertures

Applications

  • Commercial buildings

  • Multi-story car parks

  • Public areas

  • Utility suppliers

Dimensions

Heights
930, 1194, 1326, 1458, 1722, 1986, 2118, 2514mm (Other heights available)

Panel Width
1992mm

Mesh Size
62 x 132mm

Wire diameter
30mm x 4mm vertical flat bars, 6mm horizontal wires.
Tops and bottoms 30mm x 4mmflat bars.

Posts
RHS or SHS depending upon application.

Top Edge Projection
Nil - wire is flush on all edges

Finish

Options:

  • Hot dipped galvanised and polyester powder coated to any RAL colour.

  • Hot dipped galvanised only.

Specification

  • Panel: electrofused steel S235JR made up from 30x4mm flat bar positioned at 62mm centers vertically and 6mm round bars at 132mm centers horizontally; galvanized to BS EN 1461

  • Posts: flat bar/RHS; galvanized after manufacture to BS EN 1461

  • Fixings: M10 cup square bolts with permacone security nut

  • Maximum post centers: 2030mm

  • Foundations: set posts in 750x300mm minimum hole size and not less than half the depth with concrete; bottom of fencing to be a maximum of 100mm above finished ground level

  • Other requirements: polyester powder coated to any RAL colour.