All Urban - cycle racks

The bench / bike rack ROUND B is made in steel 20/10 and 30/10 thickness. It is made of 2 elements (which are quarter circle-shaped), each with 5 segments for the placement of the bikes. On each one 10 steel plates 60/10 thickness, with main hole of 26 mm diam. to hook the bike to the structure, are welded. The 2 elements are covered with panels

The Wave bike rack (10 bikes, alternate version) is made in 30/10-thick steel. The spacers, where the wheels of the bikes are placed, are laser-cut, wave-shaped and come with a hole to hook the bike. Wave can be fixed to the ground through specific bolts (not provided) and holes of 10mm diameter. For the realisation of this product, steel

This bike rack is composed by a stainless steel disc AISI 304 with a pearl finishing or as alternative a galvanized lacquered steel or in corten steel, large 12 cm and thick 8 mm. Thank the simple rectangular form with rounded edges become the ideal frame for bicycles. Designer: GIBILLERO Design overall dimension: 500×120mm – altezza 1010 mm

Pepe is a bollard of multiple possibilities, colourful and playful, or refined with exotic wood heads, or still useful for anchoring a bike thanks to posts above. A simple cylinder made of galvanised steel and painted by 114mm diameter, above and below, the coloured heads giving life to a product that, despite its simplicity of composition

The bike rack SIDE is made in steel 50/10 thickness. It is the result of the continuous welding of 2 elements and on the base there are 2 holes 14 mm diam. for the fixing to the ground through specific bolts (not provided). For the realization of this product, Steel EN10111DD11 is used and later treated with a cycle of sandblasting, cataphoresis

Ola is a laser-moulded zinc-plated steel product, entirely composed of several distanced rings and supported by two steel plates. The plates are curved in the shape of a sinuous wave. Every ring of the rack serves as a support and safety anchorage for the bicycles. Internal circular shaped holes, while maintaining the same dimensions, have

Natura made ??on the design of natural and organic form of the leaves; a single sheet of steel in the shape of the leaf that holds the bicycle wheels allowing an anchor in safety, thanks to the slots made ??by laser cutting recalling the natural veins of leaves. Essential and minimal in its form, the rack NATURA is available in several colors

The bike rack is made in steel sheet 60/10 thickness. The loop-shaped elements of the bike rack are welded to the plate with an interaxis of 65,2 cm. On the plate there are 8 holes 11 mm diam. for the fixing to the ground through specific bolts (not provided). For the realization of this product, Steel EN10111DD11 is used and later treated with a

The bike rack/bollard EIGHT is made in steel 60/10 thickness. It is the result of the continuous welding of two elements. On the sides of the bike rack there’s a hole of 30 mm diam. for the bike chain. The base is provided with 2 holes of 14 mm diam. for the fixing to the ground through specific bolts (not provided). For the realization of this

The HI BOLLARD serves as both a bollard and a bike rack and is made in steel, 50/10 thickness. On the upper part of the bollard, there are 2 holes with a diameter of 20 and 30 mm. On the middle and inner part of the bollard, a strong plate in steel 50/10 thickness is welded. For the fixing to the ground through specific bolts (not provided), there

The bike rack PEO is made in tubular steel of 43 mm diam. and 2 mm thickness. It is fixed to the ground through a circular base plate of 150 mm diam and 80/10 thickness, with 4 holes of 13 mm diam. for the use of specific bolts (not provided), welded to the tubular steel. The bike rack PEO is made in tubular steel of 43 mm diam. and 2 mm