Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Surface water / oil separators
Interceptors for surface water and wastewater pre-treatment in commercial and industrial drainage. Oil, petrol and grease separators for car parks, forecourts, workshops and kitchens. Full retention, bypass and coalescing systems to BS EN 858. Precast concrete, GRP and polyethylene units, below-ground installation with access covers. Removal of hydrocarbons, silt and fats before discharge or SuDS.
Surface water / oil separators - helping you find the best solution for your project.
ACO Q-Ceptor full retention oil separators
ACO Q-Ceptor full retention separators treat the full flow typically generated by a rainfall intensity of 65mm/hr. Full retention separators are used where there is a risk of regular contamination with oil and a foreseeable risk of significant spillages e.g. vehicle maintenance areas: compliant with the Environment Agency’s PPG3 guidelines
Combipoint SSA - surface water sediment treatment system
ACO Combipoint SSA is a surface water sediment treatment system designed for use with SuDS components. This point gully system acts as an upstream pre-treatment solution, removing sediment before water enters swales, detention basins or ponds. Made from polyethylene, it features a large silt chamber with at least 71% higher capacity than standard
ACO Q-Ceptor - polyethylene bypass oil separator
Bypass separators are used when it is acceptable not to fully treat high flows, typically in areas where there is a small risk of spillage, such as short stay car parks. The separator treats all flows generated by rainfall rates of up to 6.5mm/h. High flows above this level are allowed to bypass the separator: Compliant with the
Class 1 by-pass separator
Cowens Class 1 By-pass range provides a high level of hydrocarbon removal at normal flow rates while higher flow rates by-pass the main chamber thus preventing contamination of increased flow. Their unique vertical design dramatically reduces the tank foot print and therefore the civils excavation costs. This separator is generally recommended for
ACO Q-Ceptor in Stations Improvement Program
The expansion of the Northallerton Railway Station car park was part of the Network Rail’s government funded National Stations Improvement Programme (NSIP). The £150m programme is in partnership with train operators and is aimed at improving the facilities at 150 medium-sized stations throughout the UK. At Northallerton railway station this
Kingspan Klargester offers a wide range of forecourt separators to suit all commercial applications. Super-efficient forecourt separators provide the ideal solution for potential spillages likely to occur during vehicle refuelling and road tanker delivery. Features and benefits light and easy to install, saving time and money; inclusive of silt- PRODUCT
- Kingspan Water & Energy
The CU435 Oil Coalascer Separator allows for hydrocarbons to be removed from fluid stream through use of coalascing media, catching hydrocarbons in fluid stream. Suitable for higher flow rates than the LC60-OWS, the CU435 unit works best where silt / solids are not present. The CFD (Computational Fluid Dynamic) model improves flow paths
Klargester's Bypass Separators provide the ideal solution for low risk floods, when there is little possibility of a combined heavy rainfall and large spillage. Bypass separators fully treat all flows generated by rainfall rates of up to 6.5mm/hr. This covers over 99% of all rainfall events. Flows above this rate are allowed to bypass the- PRODUCT
- Kingspan Water & Energy
Kingspan Klargester's full retention separators can be used in car parks, roadways, fuel distribution depots, vehicle workshops and forecourts. Full retention separators treat the full flow that can be delivered by the drainage system. To put this in context, this is normally equivalent to the flow generated by a rainfall intensity of 65mm/hr- PRODUCT
- Kingspan Water & Energy
Kingspan Klargester offers a wide range of forecourt separators to suit all commercial applications. Super-efficient forecourt separators provide the ideal solution for potential spillages likely to occur during vehicle refuelling and road tanker delivery: light and easy to install, saving time and money; inclusive of silt storage volume; fitted- PRODUCT
- Kingspan Water & Energy
The LC60-OWS Oil / Water Separator allows for hydrocarbons to be removed from fluid steam by allowing low-density oils to float to the surface. Settleable solids can be caught in hopper bottom. The CFD (Computational Fluid Dynamic) model improves flow paths. The unit creates a significantly more evenly distributed flow, improving settlement
When Manchester City Football Academy commissioned an impressive new car park, they needed oil separators as part of the car park design. These would protect groundwater from oil pollution from small vehicle / plant leaks or accidental spills. Klargester’s industry-leading oil separators were chosen for the all-important surface water drainage- PROJECT
- Kingspan Water & Energy
Surface water / oil separators - helping you find the best companies for your project.
ACO Water Management
ACO Q-Ceptors are made in a range of chamber sizes and flow rates for use in car parks, maintenance areas, and industrial and residential applications
ACO Business Park, Hitchin Road, Shefford, SG17 5TECowens
Ellers Mill, Dalston, Carlisle, CA5 7QJAllerton
Sales, servicing, commissioning and repairs of interceptors and separators for wastewater sewage schemes for up to 2000 people
Woodbridge Road, Sleaford, NG34 7EWAluline
59-62 Brindley Road, Astmoor Industrial Estate, Runcorn, WA7 1PFGAP Group
Citypoint 2, 25 Tyndrum Street, Glasgow, G4 0JYKingspan Water & Energy
180 Gilford Road, Portadown, Craigavon, BT63 5LFNorth Eastern Composites
Manufactures and supplies the Tony Bartle designed Euroceptor bypass separator and Superceptor full retention separator. Both separators are type tested to the European standard BS EN 858-1 and are fully compliant with Environmental Agencys guidelines (PPG3
Unit 3 Rhodes Court, South Nelson Road, Cramlington, NE23 1WFOaklands Environmental
Bypass separators are designed to act as oil and silt separators in rainwater management; their effectiveness is dependent upon the efficiency and quality of their enclosed filtering system
Station Road, Coleshill, Birmingham, B46 1HTPremier Tech Water and Environment
Supplies full-retention and bypass separators designed to BS EN 858-1 and -2. Full-retention separators are suitable for high risk areas such as fuel storage depots and petrol forecourts, whilst bypass models are suitable for low risk areas such as car parks, roadways and hard standings
2 Whitehouse Way, Peterlee, SR8 2RASILOTANK
SILOTANK's range of bypass separators are used where the risk of a large spillage and heavy rainfall occurring at the same time is small and it is deemed that full treatment of very high flows is not necessary
Loop Road, 4 Springbank Road, Dunmurry, Belfast, BT17 0QLSPEL Products
SPEL fuel / oil separators, including full retention and by-pass Class 1 and 2 separators, meet BS EN 858-1 and are fully compliant with the Environment Agencys Pollution Prevention Guideline PPG3 and the Construction Products Regulations
Lancaster Road, Harlescott, Shrewsbury, SY1 3NQ
