In restricted access situations, where large, heavy conventional plant cannot be used, Keller provides a choice of piling systems such as continuous flight auger, cased CFA, rotary bored, drilled rock socket or driven. A number of Keller's restricted access rigs are able to enter buildings via a normal service entrance or a standard doorway.

Typical applications

  • Sites where access or headroom are restricted
  • Sites with noise and/or vibration restriction
  • Areas where weight or surcharge limits apply
  • Operational retail stores, schools, hospitals, factories and hotels
  • Archaeologically sensitive sites
  • Underpinning buildings and structures from within

Installation process

The casing, with a diameter generally in the range of 100-1080mm is advanced to the design depth using a drilling technique.

Reinforcing steel, typically an all-thread bar, is inserted into the minipile casing and high-strength cement grout pumped in. The casing may extend to the full depth of the pile or finish short of the bond zone with the reinforcing bar extending to the full depth.

Capacities vary depending on the pile diameter and subsurface profile but compressive capacities of more than 2000kN have been achieved depending on ground conditions.

Key benefits

  • Can be used to install piles inside existing buildings, under bridge structures and within tunnels
  • Can be used in all ground conditions, including obstructed ground and rock
  • Alleviates risk owing to reduced vibration and noise
  • Can be combined with other plant and solutions to maximise on-site efficiency and cost-effectiveness
  • Electric rigs can be used to reduce carbon emissions


In restricted access situations, where large, heavy conventional plant cannot be used, Keller provides a choice of piling systems such as continuous flight auger, cased CFA, rotary bored, drilled rock socket or driven. A number of Keller's restricted access rigs are able to enter buildings via a normal service entrance or a standard doorway.

Typical applications

  • Sites where access or headroom are restricted
  • Sites with noise and/or vibration restriction
  • Areas where weight or surcharge limits apply
  • Operational retail stores, schools, hospitals, factories and hotels
  • Archaeologically sensitive sites
  • Underpinning buildings and structures from within

Installation process

The casing, with a diameter generally in the range of 100-1080mm is advanced to the design depth using a drilling technique.

Reinforcing steel, typically an all-thread bar, is inserted into the minipile casing and high-strength cement grout pumped in. The casing may extend to the full depth of the pile or finish short of the bond zone with the reinforcing bar extending to the full depth.

Capacities vary depending on the pile diameter and subsurface profile but compressive capacities of more than 2000kN have been achieved depending on ground conditions.

Key benefits

  • Can be used to install piles inside existing buildings, under bridge structures and within tunnels
  • Can be used in all ground conditions, including obstructed ground and rock
  • Alleviates risk owing to reduced vibration and noise
  • Can be combined with other plant and solutions to maximise on-site efficiency and cost-effectiveness
  • Electric rigs can be used to reduce carbon emissions


 
 
 
Enquire
 

Also by Keller UK

Keller UK address and contact details

Keller Limited
Oxford Road
Ryton-on-Dunsmore
Coventry
CV8 3EG
Tel: 024 7651 1266
View on map - 3 addresses
 
Follow Keller UK
 
Not found what you're looking for? View other options