Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Lane separators
(26)
Lane separators for cycleways, traffic calming, bus lanes and car parks. Modular kerbs and delineators in recycled rubber, polymer or concrete. Bolt-down or adhesive installation on asphalt or concrete. Options with reflectors, signage posts and drainage gaps. For permanent or temporary segregation, lane guidance and impact-resistant delineation.
Lane separators - helping you find the best solution for your project.
RediPave Splitter and Jislon Satellite Islands
RediPave Splitter and Jislon Satellite Islands offer a kerb solution for traffic segregation applications. The system is modular, so can be supplied for any length of installation. Also suitable for use on bridge decks, subject to carriageway conditions: quick and easy to install; modular system to suit any application; can incorporate signage- PRODUCT
Rediweld Traffic Products
Greenwich WandOrca cycle lane separator
The WandOrca combines vertical Jislon Pole Cones (Wands) with reflective TSRGD markings, together with horizontal rubber modules. This is ideal for segregation over longer distances where vehicle speeds may be higher. The WandOrca also offers a rubber bung with a reflective glass dome which can be used instead of the Jislon Pole Cone. Spacings for
Mini Orca - recycled rubber low-profile cycle lane separator
Cycle lane separator with a low profile for light segregation of pedestrian areas, unloading locations and junctions. It has a 50mm height which is low enough to allow vehicles to cross over to the kerb edge or junction, but still act as a form of rumble strip to alert drivers that they have crossed over into a cycle lane. Typical spacings range
Milestone Island - recycled rubber traffic island for easy surface mounting
The Milestone Island cycle lane separator is a recycled product manufactured in the UK. Key features: easy installation - bolt down product requiring no excavation; surface-mounted - bolt down with no excavation and no spoil; health and safety - weighs less than 20kg for manual handling. Applications: for multiple or temporary use; can be used on tarmac or concrete surfaces
Orca MKII Cycle Lane Separator - recycled rubber road safety divider
The Orca MKII has been designed to provide light segregation for cycle lanes, with a half-battered kerb face for vehicles and a cycle-friendly concave profile to protect riders. Retro-reflective beading offers good visibility at night and in low light areas. Recessed white reflective markings provide high visibility and help reduce wear and tear
Endurokerb™ modular cycle lane defender system
Endurokerb™ cycle lane defenders are a modular system designed to separate cycle lanes while protecting cyclists. Endurokerb is a modular solution for cycle scheme designers with seven design modules which can be interconnected using a connector kit. This feature enables a variety of configurations, enabling designers to build-up an arrangement
One Piece WandOrca - cycle lane separator
The One Piece WandOrca provides a 1m length of lane division combined with one Jislon Pole Cone. Together these provide a passively safe product as both are able to absorb energy on impact without cracking or fracturing. With 4 fixings per unit it is ideal for the quick and easy installation of permanent or temporary pop-up cycle lanes. The Jislon
Orca Cycle Lane Separator - recycled rubber bolt-down cycle lane divider
Orca Cycle Lane Separator is a modular, surface-mounted system made from recycled rubber for cycle lane segregation. Designed for quick bolt-down installation, it creates a visible barrier between vehicles and cyclists. Two styles are available: Zig Zag and Tip Toe, both with a black finish and moulded-in white markings for visibility
Kerb Orca - recycled rubber cycle lane separator for light segregation
Cycle lane segregation product designed to create a continuous horizontal barrier between cyclists and vehicles. The product has a splayed face on the cycle side and half-battered profile on the vehicle side, replicating a familiar kerb-face for drivers. It is positioned within the cycle lane, up to the white carriageway marking
Cycle Lane System - plastic cycle lane separator for road safety
Cycle Lane System (CLS) Modular Edge is a modular cycle lane separator made from a speciality base material with a flexible polymer post, designed to create a visible barrier between cycle and traffic lanes. Recessed high-intensity reflective bands and a bayonet fixing system support durability and visibility. Multiple heights and lengths are
One Piece WandOrca for Whitburn Cycle Route
We recently worked with South Tyneside Council on the implementation of this cycle lane scheme, linking the coastal path between Sea Lane, Whitburn, and Sunderland. The One Piece WandOrca offers safe segregation for cyclists wishing to travel along the coast and with a compact design of just one metre long, it is an ideal solution for minimal
Greenwich WandOrcas for 'Quickway' cycle lane scheme - Oxford
Rediweld Greenwich WandOrca lane separators were used by Oxfordshire Council as part of its local transport and connectivity plan to create ‘Quickway’ cycle routes linking key destinations via main routes into the city centre. Greenwich WandOrcas integrate vertical and horizontal protection to provide a visible deterrent to stop motorists
The CLS (Cycle Lane Separator) modular traffic calming edge has been designed especially to provide a highly visible separation between cycle lanes and traffic lanes. The modular traffic calming island, combined with the speciality flexible polymer of the post, ensures that the bollard will withstand multiple impacts and return to upright without- PRODUCT
- Leafield Environmental
Interlocking, heavy-duty, high-strength cast concrete barrier designed for perimeter protection against vehicular attack or intrusion. Suitable for traffic management, flood defence, site security, rockfall protection, edge protections and other applications. 250 (l) x 610 (w) x 810mm (h); 1450kg- PRODUCT
- Elite Precast Concrete
Lane separators - helping you find the best companies for your project.
Rediweld Traffic Products
9-10 Newman Lane, Alton, GU34 2QRStreet Furnishings
Festival House, Mumbery Hill, Wargrave, Reading, RG10 8EEElite Precast Concrete
Halesfield 9, Telford, TF7 4QWEuropalite
Manufactures traffic lane separators from impact-resistant, UV stabilised, plastic polymer. The companys range covers light and heavy traffic volumes, long term and temporary works. Includes a separator with an intergral weight of approximately 50kg which eliminates the need for ballast. During storage and transportion, the units simply stack
Millward House, Eastfield Side, Sutton-in-Ashfield, NG17 4JWHardstaff Barriers
Multibloc TVCB provide a safe working area - protecting the workforce from vehicles travelling next to the site
Hillside, Gotham Road, Kingston on Soar, Nottingham, NG11 0DFHazard Safety Products
Traffic separators available to BS EN 1317 - N1 50mph test
55-57 Bristol Road, Edgbaston, Birmingham, B5 7TULeafield Environmental
Leafield Way, Leafield Industrial Estate, Corsham, SN13 9UDMarshalls
Lane separators for bikes and traffic calming
Landscape House, Premier Way, Lowfields Business Park, Elland , HX5 9HTMoravia
Unit A-C, Stonedale Road, Oldends Industrial Estate, Stonehouse, GL10 3SA
