New entries

The Kimmeridge single-sided cycle compound provides safe, secure storage for cycles and cycle accessories. This completely covered shelter also protects cycles and cyclists from all weathers. Can be tailored to suit requirements with different sizes, cycle racks and gates available. Can also be supplied without cycle stands for use as a waiting

Slimline manual arm barriers are suitable for protecting car parks and other entrances to commercial property sites, and where access is restricted during certain times of the day. Easy to use and simple to install, the barrier has been designed with the end user in mind and counterbalance at 45°, making the process of lifting and lowering easier

Urban Swing Gates are made from galvanised steel with a polyester coating, designed to match Urban fencing systems. Each gate leaf includes lockable ground bolts for secure open or closed positioning. Heights range from 1.0m to 3.0m. Single leaf widths are 1.0m, 1.2m, or 1.5m; double leaf widths range from 2.0m to 10m. Gate infill options include

Urban Fencing's range of automated cantilever sliding gates is manufactured to accommodate 100% duty cycle usage, providing confidence to buyers and specifiers when purchasing such a valuable asset. Suitable for a range of commercial and industrial applications, the gates can accommodate spans of up to 12m. Gates are operated by a 230V single

Woodscape hardwood cycle bollards are manufactured to a high standard using naturally very durable hardwood. The cycle bollard has a number of customisable options, including: available round or square; choice of 5 top profiles; 6 section sizes ranging from 150-300mm - greater if determined; 3 standard lengths from 1200-1800mm; supplied with or

Woodscape's Hinge Down bollards allow or restrict vehicle access and are suitable for private parking and pedestrian walkways. It is made from Naturally Very Durable Hardwood, with hinge adaptation, including hasp and staple, all in bead blasted stainless steel. 1/3 of the bollard is below ground level and it projects approximately 120mm above

Woodscape's Removable Bollards are allow or restrict vehicle access and are suited to private parking and pedestrian walkways, and are made from Naturally Very Durable Hardwood. A 30mm through hole is incorporate for a lifting bar (supplied on site by others). They are manufactured to an exceptionally high standard and require little or no

Lincoln is contemporary shelter that is designed to suit any location and to fit in within existing surroundings. This shelter provides a modern and stylish solution, with a curved perspex and cantilever hardwood timber frame. Houses cycles via racks or stands, with a powder-coated creative bike-framed stand. Lincoln Shelter can be entirely built

Two Tier Bike Rack Lift Assisted is a double stack cycle parking system for high-density cycle storage. Gas struts support the upper tier to reduce lifting effort. Designed to double cycle parking capacity within the same footprint. Made from galvanised steel for indoor and outdoor use. Suitable for standard bikes and e-bikes: double stack cycle

Type 194RR is a fold-down cast iron security bollard with a below-ground coffin box housing. When not in use the bollard folds flat and sits flush within the ground box. A simple lift-and-drop action locks the bollard in the vertical position. Proven impact resistance - capable of immobilising a vehicle on impact. Interchangeable tops available to

Autopa Perimeter Barriers (Galvanised Steel) are hooped barriers made from galvanised or stainless steel, designed to secure site boundaries and restrict vehicle access while maintaining visibility. Manufactured in the UK to order, these barriers come in a range of widths, tube diameters, and finishes, with options for fixed, flanged, or removable

Type 181 is a cast iron cycle parking solution comprising two bollard posts linked by a twin horizontal rail. A robust, heritage-style cycle parking solution suited to town centres, transport hubs and public realm schemes. Cycle parking logos can be incorporated into the bollard design: cast iron posts linked by twin horizontal rails; accommodates

187 cycle stand is Sheffield-style bike parking unit.750mm wide, 750mm high, made from steel or stainless steel. Installation options include 250mm root-fixed or flanged base: cycle stand with distinct Sheffield design; 750mm width and 750mm height; made from steel or stainless steel; root-fixed (250mm) or flanged base options. Public cycle

185 Cycle Stand is a steel cycle stand with a curved semi circular form and logo post for easy identification. 1950mm wide and 1600mm high, with a 3380mm height to the top of the logo post. Made from steel for long-term outdoor use: steel cycle stand with curved semi circular design; 1950mm wide and 1600mm high cycle rack; tall 3380mm logo post

Tubular cycle stand made from stainless steel with an iroko hardwood insert. Designed for secure cycle parking, it measures 80 x 7 x 63cm. Surface fixed, buried flange, and buried root installation options are available. Painted, bead blasted, satin and brushed finishes are offered. Grade 304 and 316 stainless steel options are available