Designer: GIBILLERO Design
Artu’ is composed of a 8 cm wide and 8 mm thick single plate, available in INOX AISI 304 steel or zinc-plated painted steel, or in corten steel.

Its peculiar shape binds perfectly with every bike model, accompanying the structure and making the safety anchorage very simple.

ARTU’ is easy to install and its limited dimensions make it easy to be used both in public and private contexts.


Designer: GIBILLERO Design
Artu’ is composed of a 8 cm wide and 8 mm thick single plate, available in INOX AISI 304 steel or zinc-plated painted steel, or in corten steel.

Its peculiar shape binds perfectly with every bike model, accompanying the structure and making the safety anchorage very simple.

ARTU’ is easy to install and its limited dimensions make it easy to be used both in public and private contexts.


 
 
 
Downloads
  • Artu cycle stand by LAB23 technical specification
    Artu cycle stand by LAB23 technical specification
    3pp 2.54MB
    Download
 
 
 
Enquire
 


Related entries

  • All Urban: Ola cycle rack by LAB23
    Ola cycle rack by LAB23
    All Urban
    Ola is a laser-moulded zinc-plated steel product, entirely composed of several distanced rings and supported by two steel plates. The plates are curved in the shape of a sinuous wave. Every ring of the rack serves as a...
  • All Urban: Pepe cycle stand by LAB23
    Pepe cycle stand by LAB23
    All Urban
    Pepe is a bollard of multiple possibilities, colourful and playful, or refined with exotic wood heads, or still useful for anchoring a bike thanks to posts above. A simple cylinder made of galvanised steel and painted by...
  • All Urban: Time cycle stand by LAB23
    Time cycle stand by LAB23
    All Urban
    The Time cycle stand (1 bike) is made in 60/10-thick steel. It is cone-shaped with a square base made in exotic hardwood, which is fixed to the structure on the upper part through specific screws. The structure is supported...
  • All Urban: B-Cycle combined bike stand and bench by LAB23
    B-Cycle combined bike stand and bench by LAB23
    All Urban
    The B-Cycle bench/bike rack is made in 60/10-thick steel. The 1200×500mm seat is made in 40mm-thick exotic hardwood, fixed to the structure in steel through specific screws. Through the laser-cut section on the structure of...
  • All Urban: Cornice Cycle Rack By LAB23
    Cornice Cycle Rack By LAB23
    All Urban
    Designer: GIBILLERO Design This bike rack is composed by a stainless steel disc AISI 304 with a pearl finishing or as alternative a galvanized lacquered steel or in corten steel, large 12 cm and thick 8 mm. Thank the simple...
  • All Urban: Natura Cycle Rack By LAB23
    Natura Cycle Rack By LAB23
    All Urban
    Designer: GIBILLERO Design Natura made ??on the design of natural and organic form of the leaves; a single sheet of steel in the shape of the leaf that holds the bicycle wheels allowing an anchor in safety, thanks to the...
  • All Urban: Eight Cycle Rack By LAB23
    Eight Cycle Rack By LAB23
    All Urban
    The bike rack/bollard EIGHT is made in steel 60/10 thickness. It is the result of the continuous welding of two elements. On the sides of the bike rack there’s a hole of 30 mm diam. for the bike chain. The base is provided...
  • All Urban: Fluxus cycle rack by LAB23
    Fluxus cycle rack by LAB23
    All Urban
    The bike rack is made in steel sheet 60/10 thickness. The loop-shaped elements of the bike rack are welded to the plate with an interaxis of 65,2 cm. On the plate there are 8 holes 11 mm diam. for the fixing to the ground...
  • All Urban: Peo cycle rack by LAB23
    Peo cycle rack by LAB23
    All Urban
    The bike rack PEO is made in tubular steel of 43 mm diam. and 2 mm thickness. It is fixed to the ground through a circular base plate of 150 mm diam and 80/10 thickness, with 4 holes of 13 mm diam. for the use of specific...
  • All Urban: Side Cycle Rack By LAB23
    Side Cycle Rack By LAB23
    All Urban
    The bike rack SIDE is made in steel 50/10 thickness. It is the result of the continuous welding of 2 elements and on the base there are 2 holes 14 mm diam. for the fixing to the ground through specific bolts (not provided).
Not found what you're looking for? View other options

Ask All Urban about

Artu' Cycle Stand By LAB23