Extruded black or green lightweight plastic mesh for grass reinforcement and protection where occasional light vehicle or pedestrian use is required. Supplied in 2 x 30m rolls and in two grades, Standard and Heavy, as determined by the application. Ideal for reinforcing grassed surfaces prone to wear, rutting and smearing which can result a muddy surface incapable of being used.

Applications

  • Overflow grass car parks

  • Grass access routes

  • Pedestrianised grassed areas

  • Grass footpaths

  • Wheelchair / disabled (DDA) access routes

  • Front lawn parking

  • Aircraft taxiways

Features

  • Made from 100% recycled high-density polyethylne

  • UV stabilised

  • Available in 2 grades depending on application and level of traffic

  • Colours: green | black

Manufactured from 100% recycled high-density polyethylene, the mesh is UV-stabilised and simple to install; after cutting the grass short, the TurfProtecta® turf reinforcement mesh is unrolled and pinned to the surface using metal U-pins or plastic pegs. By allowing plants to grow through the plastic mesh apertures, the grass sward intertwines with the plastic mesh filaments creating a strong, discreetly reinforced surface, limiting damage and reducing soil compaction. It is advisable to allow the grass to fully establish before the area is used to create a stronger reinforced surface (this may take only a few weeks to a few months depending on the grass growing season).

It is strongly recommended that installation be carried out during the growing season to allow a strong interlock between the TurfProtecta® mesh and the grass roots. The grass will grow through the reinforcement mesh, creating a natural reinforced and stabilised grassed surface capable of applications including car parks and grass access routes.

After a few months of the growing season, the grass roots will have intertwined with the mesh filaments creating a strong stable surface capable of withstanding heavy pedestrian and occasional vehicular use. The grass can be cut as normal and will have regained its natural appearance. The grass can however be mown, rolled and fertilised as usual during this period.

TurfProtecta® grass reinforcement mesh can be installed onto existing grassed surfaces or newly landscaped areas (laid on top of a level, well drained, seeded soil, pinned and then covered with a layer of topsoil and seed), for both permanent or temporary applications.

Range

Product

Unit

Grade

Size

Width

Length

Weight (nominal)

Material

Colour

Part No.

TurfProtecta™

Roll

550g/SQM

2m x 30m

2m

30m

35kg

100% Recycled HDPE

Green

049202

TurfProtecta™

Roll

550g/SQM

2m x 30m

2m

30m

35kg

100% Recycled HDPE

Black

009862

TurfProtecta™

Roll

660g/SQM

2m x 30m

2m

30m

40kg

100% Recycled HDPE

Green

049967

TurfProtecta™

Roll

660g/SQM

2m x 30m

2m

30m

41kg

100% Recycled HDPE

Black

048175

Steel U-Pins

50 units/pack

-

170mm x 70mm x 6mm diametre

70mm

170mm

79g

Steel

Steel

41824

Black Pegs

100 units/pack

-

140mm long

-

140mm

100% Recycled HDPE

Black

60351