Gate type Folding gates
Operating speed 200mm/s
Span (m) 12, 24
Max. height (mm) 8000
 
 
 

Multifold security entrance gates are designed for securing larger car park entrances. They also provide ventilation to allow exhaust fumes to disperse.

Manufacture

  • Galvanised as standard
  • Standard leaf designs have a 60x40mm RHS perimeter frame with 25mm diameter tubes or 25mm SHS uprights at 125mm centres. Higher gates have a mid-rail for strengthening.

Installation

Gates are top-hung on four wheel trolley bearing hangers that incorporate panel hinges and run in a galvanised steel top track. An auxiliary top track is attached to ensure that the leaves fold correctly.

The bottom hinges are connected to brass rollers in a steel channel bottom track that is set for alignment within a 200x100mm chase before final grouting into position.

Operation

Electrically operated by an enclosed, three-phase motor gearbox mounted on the top track. Open / close / stop push buttons are mounted adjacent to the opening at the slam side.

Disconnection or emergency manual operation is provided at low level, adjacent to the motor and safety edges are fitted as standard to the leading edges.

Options

  • Polyester powder coated in choice of RAL colours
  • Custom designs to suit requirements and complement the external building cladding
  • Wicket gates in the main gate or adjacent in a matching fixed section
  • Remote control
  • Photocells
  • Timer closing
  • Loop detectors


Multifold security entrance gates are designed for securing larger car park entrances. They also provide ventilation to allow exhaust fumes to disperse.

Manufacture

  • Galvanised as standard
  • Standard leaf designs have a 60x40mm RHS perimeter frame with 25mm diameter tubes or 25mm SHS uprights at 125mm centres. Higher gates have a mid-rail for strengthening.

Installation

Gates are top-hung on four wheel trolley bearing hangers that incorporate panel hinges and run in a galvanised steel top track. An auxiliary top track is attached to ensure that the leaves fold correctly.

The bottom hinges are connected to brass rollers in a steel channel bottom track that is set for alignment within a 200x100mm chase before final grouting into position.

Operation

Electrically operated by an enclosed, three-phase motor gearbox mounted on the top track. Open / close / stop push buttons are mounted adjacent to the opening at the slam side.

Disconnection or emergency manual operation is provided at low level, adjacent to the motor and safety edges are fitted as standard to the leading edges.

Options

  • Polyester powder coated in choice of RAL colours
  • Custom designs to suit requirements and complement the external building cladding
  • Wicket gates in the main gate or adjacent in a matching fixed section
  • Remote control
  • Photocells
  • Timer closing
  • Loop detectors


Interested in this product?
Call 01204 871037
OR
 
 
 
Downloads
  • Multifold car park security entrance gates
    Multifold car park security entrance gates
    2pp 693.81KB
    Download
  • Multifold Gate dwg - pair
    Multifold Gate dwg - pair
    447.5KB
    Download
  • Multifold Gate dwg - single
    Multifold Gate dwg - single
    757.79KB
    Download
  • Multifold gates NBS specification
    Multifold gates NBS specification
    1pp 58.87KB
    Download
 
 
 
Enquire
 


More industrial gates by Bolton Gate Company

View all

Also by Bolton Gate Company

Bolton Gate Company address and contact details

Bolton Gate Company Ltd
Waterloo Street
Bolton
BL1 2SP
Tel: 01204 871037
Fax: 01204 871049
View on map
 
 
Not found what you're looking for? View other options

Ask Bolton Gate Company about

Multifold car park security entrance gates