System type Rigid (welded) mesh systems
Product accreditation BS 1722-14
Overall height 1.8, 2.0, 2.4m
Panel width 3.005m
Aperture size (h x w) 150x50/25mm
Wire / bar / pale size 4mm vertical and 5mm horizontal wires
Post centres 3.02m
Post sections 60x60 RHS
 
 
 

ProGuard is Barkers' premium, general purpose rigid mesh fencing system. It uses varying mesh apertures to give a distinct striped pattern effect. The panels have 'V' crimps, which reinforce the mesh as well as providing visual appeal.

  • Varying mesh apertures for a distinctive ‘stripe’ effect
  • Clips from post to mesh
  • Stainless steel, anti-tamper fixing
  • Conforms to British Standard – BS 1722 Part 14:2016
  • Galvanised to BS EN 1461
  • Powder coated in range of RAL colours
  • Can be stepped to follow contours on the ground
  • Can be fixed using clamp bar for increased level of security
  • Additional security features such as clamp bar or razor wire extensions available

Applications

ProGuard is suitable for most applications where general site demarcation is required including:

  • Schools
  • Public areas
  • Commercial businesses
  • Retail outlets

Specification

Proguard is available in 1.8, 2 and 2.4m standard heights.

ProGuard 1.8
Height: 1.8m
Panel HxW: 1.73 x 3.005
Nominal wire diameter: 5mm
Number of V beams: 3
Post centres: 3.02m
Post section: 60x40 RHS

ProGuard 2.0
Height: 2.0m
Panel HxW: 1.93 x 3.005
Nominal wire diameter: 5mm
Number of V beams: 3
Post centres: 3.02m
Post section: 60x40 RHS

ProGuard 2.4
Height: 2.4m
Panel HxW: 2.33 x 3.005
Nominal wire diameter: 5mm
Number of V beams: 3
Post centres: 3.02m
Post section: 60x40 RHS

Mild steel elements are galvanised to the appropriate BS EN standards.

Powder coating can be specified in a wide range of RAL colours.

Heights above the standard range can be achieved using a multi-lift system.

Manufacture

Panels are manufactured using wire mesh welded at each intersection to create a strong and durable panel. The mesh aperture has a 150x50/25mm mesh spacing, allowing see-through visibility.

Posts are manufactured from 60x60x2.5mm RHS. All posts include threaded inserts, leaving a clean and flush design to the rear face.

Installation

Installed using specially designed PROFIX securing system brackets.

A slotted 25x5mm clamp bar can be requested for additional security.

Gates

Standard and tailor-made gates are available to suit requirements. They are supplied multi-holed to suit site conditions with an anti-climb slide latch, rear hung adjustable hinges and padlockable drop-bolts.


ProGuard is Barkers' premium, general purpose rigid mesh fencing system. It uses varying mesh apertures to give a distinct striped pattern effect. The panels have 'V' crimps, which reinforce the mesh as well as providing visual appeal.

  • Varying mesh apertures for a distinctive ‘stripe’ effect
  • Clips from post to mesh
  • Stainless steel, anti-tamper fixing
  • Conforms to British Standard – BS 1722 Part 14:2016
  • Galvanised to BS EN 1461
  • Powder coated in range of RAL colours
  • Can be stepped to follow contours on the ground
  • Can be fixed using clamp bar for increased level of security
  • Additional security features such as clamp bar or razor wire extensions available

Applications

ProGuard is suitable for most applications where general site demarcation is required including:

  • Schools
  • Public areas
  • Commercial businesses
  • Retail outlets

Specification

Proguard is available in 1.8, 2 and 2.4m standard heights.

ProGuard 1.8
Height: 1.8m
Panel HxW: 1.73 x 3.005
Nominal wire diameter: 5mm
Number of V beams: 3
Post centres: 3.02m
Post section: 60x40 RHS

ProGuard 2.0
Height: 2.0m
Panel HxW: 1.93 x 3.005
Nominal wire diameter: 5mm
Number of V beams: 3
Post centres: 3.02m
Post section: 60x40 RHS

ProGuard 2.4
Height: 2.4m
Panel HxW: 2.33 x 3.005
Nominal wire diameter: 5mm
Number of V beams: 3
Post centres: 3.02m
Post section: 60x40 RHS

Mild steel elements are galvanised to the appropriate BS EN standards.

Powder coating can be specified in a wide range of RAL colours.

Heights above the standard range can be achieved using a multi-lift system.

Manufacture

Panels are manufactured using wire mesh welded at each intersection to create a strong and durable panel. The mesh aperture has a 150x50/25mm mesh spacing, allowing see-through visibility.

Posts are manufactured from 60x60x2.5mm RHS. All posts include threaded inserts, leaving a clean and flush design to the rear face.

Installation

Installed using specially designed PROFIX securing system brackets.

A slotted 25x5mm clamp bar can be requested for additional security.

Gates

Standard and tailor-made gates are available to suit requirements. They are supplied multi-holed to suit site conditions with an anti-climb slide latch, rear hung adjustable hinges and padlockable drop-bolts.


Interested in this product?
Call 01782 319264
OR
 
 
 
Downloads
  • ProGuard fencing technical drawing
    ProGuard fencing technical drawing
    3pp 694.54KB
    Download
  • ProGuard fencing
    ProGuard fencing
    1pp 421.19KB
    Download
 
 
 
Enquire
 


Related entries

  • Barkers Fencing: Twinguard SL1 rigid mesh security fencing
    Twinguard SL1 rigid mesh security fencing
    Barkers Fencing
    Barkers TwinGuard SL1 is a cost-effective rigid mesh fencing, using durable TwinGuard 868 Mesh Panels with a tested security certificate. Easy to install - simple clamp bar fixed system, light-weight panels. Can be...
  • Barkers Fencing: ProGuard rigid mesh fencing, Staffordshire Fire & Rescue
    ProGuard rigid mesh fencing, Staffordshire Fire & Rescue
    Barkers Fencing
    ProGuard mesh fencing, swing gates and cantilever gates were used extensively in the reconstruction of Staffordshire county’s fire stations
Not found what you're looking for? View other options

Ask Barkers Fencing about

ProGuard - premium GP mesh fencing with stripe effect