Steel palisade systems
1.2 - 3.0m
|Wire / bar / pale size||
5 pale options, 2 - 4mm thickness
Barkers' Palisade fencing is manufactured and supplied in a wide range of styles, heights and designs to suit applications ranging from general purpose boundary demarcation to high security applications.
Palisade is available with either a D or W profile and in seven heights ranging from 1.2-3.0m.
Round and notched
‘W’ profile 2.0mm – commercial specification
‘W’ profile 2.5mm – general purpose to BS: EN: 1722 Pt 12
‘W’ profile 3.0mm – security purpose to BS: EN: 1722 Pt 12
‘D’ profile 3.0mm – general purpose to BS: EN: 1722 Pt 12
‘D’ profile 3.5mm – security purpose
‘D’ profile 4.0mm – security purpose to BS: EN: 1722 Pt 12
Horizontal cross rails
Three standard sizes to suit height and site requirements.
45x45mm for 1.2, 1.5 and 1.8m heights
50x50mm for 2.0, 2.1 and 2.4m heights
65x50mm for 3.0m
RHS 100x55 IPE
Available with welded or slotted fishplates, complete with loose fishplates that can be concreted-in, base-plated for bolting down, or cranked.
Posts can be vertically extended to take barbed or razor wire.
Panels can be raked to allow for most site conditions.
All fixings are anti-vandal.
For added security, pales can be welded in place.
Hot dip galvanised to BS EN ISO 1461 as standard.
Polyester powder coating option.
Manufactured in the UK by Barkers Fencing.
Security topping options
Razor wire coils
Razor wire tape
Standard and tailor-made gates are available to suit requirements.
They are supplied multi-holed to suit site conditions with an anti-climb PROTECTORGATE slide latch, rear-hung adjustable hinges and padlockable drop-bolts