The Avon Resilience SSF100 Bollard is an IWA14-1 impact-tested super-shallow foundation bollard, designed to provide stand-off hostile vehicle protection for infrastructure without the need for deep foundations.
With a structural foundation depth of just 100mm, the bollard offers the shallowest of foundations, whilst still providing a high level of protection against aggressive vehicle attack.
It can be customised to blend into surrounding environments, with a variety of sleeve options, including stainless steel and ornate finishes. Ground finishes can include concrete, tarmac, block paving or crushed stone. The bollard system can also incorporate an removable option.
- Physically impact-tested to IWA 14-1:2013
- Unobtrusive in appearance
- Super shallow foundation
- Alternative sleeve options
- Modular design
- Confidence in proven performance
- Adaptable to surrounding aesthetics
- Minimal civil installation
- Overcomes site depth restrictions
- Full perimeter security
Physically tested in an array of 3 bollards to the IWA14-1:2013 impact testing standard using an N2A vehicle travelling at 64kph (40mph). It is designed and constructed to be installed with the minimum of civil excavation. Its unique arrangement option enable it to be a flexible and versatile security solution.
The Resilience SSF100CR bollard can be integrated with Avon's retractable PAS 68 bollards to create a cohesive protective perimeter around an area or building.
This is a specialist high-security product and a full site risk assessment must be carried out at design stage to ensure that all relevant safety systems are included.
PAS 68 and IWA 14-1 tested bollards should be installed in accordance with the correct foundation drawings and should be installed with a clear distance of 1200mm (measured 600mm above ground level) between the facing edges of each bollard. Please refer to BSi PAS 69 or IWA 14-2 for guidance.
Bollards are supplied painted black with a reflective banding as standard, other sleeve finishes are available as options:
- Stainless steel sleeves
- Removable option
- Bespoke ornate sleeves
- DDA-compliant banding
- Dome / mitre / flat tops
Single bollard: tube diameter 273mm
Bollard height: 1m (above ground level)
IWA 14-1 classification: IWA 14-1:2013 bollard V/7200(N2A)/64/90:4.9
Model tested: 1000mm above ground with a spacing of 1200mm between bollards
Foundation depth: 100mm (Category B Depth <0.5m below ground level)
Construction: comprised of a high-strength steel tube 273mm diameter mounted on an integrated steel platform. (Appropriate manufacturing tolerances apply).