Associated products Fountain pumps
 
 
 

Heathland Group's range of waterfall pumps uses the same reliable submersible pump technology that is used in many of their fountain and aerator pumps. All waterfall pump systems can be built using a choice of mount, for use in wet wells, on solid pads, on sledges for pond bottoms, or even in the popular "pond-less" design. They all include a flexible discharge hose with check valve, electrical quick disconnect and a control panel.

Sledge style waterfall pumps

  • Can utilise any of the four ACI waterfall pump lines: Angel, Niagara, Niagara 2 or Yosemite
  • Allows pump to sit lightly on the pond bottom
  • A flexible hose connects to the pipe at the pond shore
  • No expensive wet well required
  • Sledge style pumps (excluding Yosemite) approx 914 (h) x 1066 (w) x 1524mm (l); can be installed in water as shallow as 1220mm

Horizontal and vertical style waterfall pumps

  • Can utilise any of the four ACI waterfall pump lines: Angel, Niagara, Niagara 2 or Yosemite
  • Can be used installed on a solid pad, in a wet well, or "pond-less" design
  • Optional connection and flexible hose for ease of installation
  • Horizontal pump dimensions (excluding Yosemite) approx 610 (h) x 610 (w) x 1829mm (l) including a check valve
  • Vertical pump dimensions (excluding Yosemite) approx 1829 (h) x 914 (w) x 914mm (l) including a check valve

Accessories

  • Low-resistance, non-spring check valve design to prevent back-flow
    - Available in 100, 150 and 200mm
    - Choice of solvent fit connection, flange mount or quick disconnects
  • UV-resistant flex hose, reinforced for pressure and durability
  • Lighting options available
  • Easy clean, high strength, composite suction screen
  • Electrical quick disconnect
  • Control panel
  • 3-year parts warranty (non-wear part)
  • 3-year return to base labour warranty


Heathland Group's range of waterfall pumps uses the same reliable submersible pump technology that is used in many of their fountain and aerator pumps. All waterfall pump systems can be built using a choice of mount, for use in wet wells, on solid pads, on sledges for pond bottoms, or even in the popular "pond-less" design. They all include a flexible discharge hose with check valve, electrical quick disconnect and a control panel.

Sledge style waterfall pumps

  • Can utilise any of the four ACI waterfall pump lines: Angel, Niagara, Niagara 2 or Yosemite
  • Allows pump to sit lightly on the pond bottom
  • A flexible hose connects to the pipe at the pond shore
  • No expensive wet well required
  • Sledge style pumps (excluding Yosemite) approx 914 (h) x 1066 (w) x 1524mm (l); can be installed in water as shallow as 1220mm

Horizontal and vertical style waterfall pumps

  • Can utilise any of the four ACI waterfall pump lines: Angel, Niagara, Niagara 2 or Yosemite
  • Can be used installed on a solid pad, in a wet well, or "pond-less" design
  • Optional connection and flexible hose for ease of installation
  • Horizontal pump dimensions (excluding Yosemite) approx 610 (h) x 610 (w) x 1829mm (l) including a check valve
  • Vertical pump dimensions (excluding Yosemite) approx 1829 (h) x 914 (w) x 914mm (l) including a check valve

Accessories

  • Low-resistance, non-spring check valve design to prevent back-flow
    - Available in 100, 150 and 200mm
    - Choice of solvent fit connection, flange mount or quick disconnects
  • UV-resistant flex hose, reinforced for pressure and durability
  • Lighting options available
  • Easy clean, high strength, composite suction screen
  • Electrical quick disconnect
  • Control panel
  • 3-year parts warranty (non-wear part)
  • 3-year return to base labour warranty


 
 
 
Downloads
 
 
Video
 
 
 
 
 
Enquire
 


Also by Heathland Group

Heathland Group address and contact details

Heathland Group Limited
8 Thorpe Road
Norwich
NR1 1RY
Tel: 0800 389 1990
View on map
 
Follow Heathland Group
 
Not found what you're looking for? View other options

Ask Heathland Group about

Waterfall pumps