|Canopy / casing material||
|Glazing / diffuser material||
Sam Hecht and Kim Colin designed the SLOPE luminaire drawing a gentle profile with a subtle angle of just nine degrees that avoids lighting contamination and glaring. Such as the slopes of a hill or a street, typical form in any urban topography, SLOPE gently blends in the landscape.
The family was designed to adapt to all types of pre-existing mount and to light any public or private space. The arm rotation and vertical flow of the luminaire afford non-invasive, efficient and comfortable lighting. It incorporates a wide range of street distributions that guarantee uniform lighting values, visual comfort and low maintenance.
SLOPE luminaire is compatible with ARNE, ARNE S, RAMA and CANDELA columns.
Designer: Industrial Facility, 2017
Injected aluminium luminaire, primed and with paint finish. Injected aluminium accessories, primed and painted with same finish. Injected abs internal reflector. Tempered optical glass diffuser. Poles made of hot-dip galvanised and primed steel, painted with the same finish: 3,60m, 4,40m, 5,20m and 6,00m heights, with one circular tube section of Ø 114,3 mm; 6,20m height, with two circular tube sections of Ø 114,3 mm at the top and Ø152 mm at the bottom.
Adaptable to various diameters of cylindrical pole. The pole is fixed using a concrete cube, with groove for wiring, made on-site and four pole anchor bolts, 20 cm below the pavement surface. Delivered in two parts: luminaire and accessories; or three parts: luminaire, accessories and pole. Instructions, screws, template and pole anchor bolts are included.