Suitability Streets
Parks
Private gardens
Frame material Aluminium
Seat material Concrete
Style Contemporary
Fixings Free standing
Root fixed
Seat length (mm) Variable please see below
Seat depth (mm) Variable please see below
Aboveground height (mm) Variable please see below
Seat height (mm) Variable please see below
Belowground height (mm) Variable please see below
Weight (kg) Variable please see below
 
 
 

Designer: Julià Espinàs, Olga Tarrassó, 2018

A modular bench system that proposes new possibilities for structuring spaces by combining a single beam with three support legs at two different heights. The possible combinations of slats and support legs offers multiple solutions on very diverse scales – in urban or landscaped areas as well as private community spaces.

Materials:

The UHPC beams (fibreglass reinforced concrete), 2.38 m long with a section of approximately 6 x 27 cm, are mass coloured in earth, white or grey tones, with a waterproof exposed aggregate finish. Various finishes and colours are possible,
depending on the quantity ordered.
The support structures come in three types (high, low or mixed) and are made in AG3 cast aluminium with an anodized finish.

Dimensions (cm):

RIB01 > 20 x 12 x 5
RIB11 > 48 x 17 x 47
RIB12 > 48 x 17 x 77
RIB13 > 48 x 17 x 77
RIB21 > 250 x 50 x 40
RIB23 > 250 x 50 x 40


Weight (Kg):


RIB01 > 0,65
RIB11 > 4,50
RIB12 > 5,90
RIB13 > 5,20
RIB21 > 100
RIB23 > 100

Colours & Finishes

Ground/Earth & Grey 

Instalation: The concrete blocks are attached by stainless steel screws to the aluminium supports.
Several options of installation and levelling plates allow you to choose the best solution to place the bench freestanding or fixed with
stud anchors secured in holes drilled into the paving and filled with epoxy resin, quick-setting cement or similar. The bench is delivered
dismantled with assembly instructions. The screws and stud anchor are delivered with the supports.
Maintenance: Because of the properties of the material, no functional maintenance is required.
(For further information about this product, visit the website urbidermis.com)

Applicable standards:UNE-EN 13369, UNE-EN 13198, UNE-EN 13369, UNE-EN 12390-3, UNE-EN 12504-1, UNE 41510 / UNE-EN ISO 9227 / EN ISO 7599


Designer: Julià Espinàs, Olga Tarrassó, 2018

A modular bench system that proposes new possibilities for structuring spaces by combining a single beam with three support legs at two different heights. The possible combinations of slats and support legs offers multiple solutions on very diverse scales – in urban or landscaped areas as well as private community spaces.

Materials:

The UHPC beams (fibreglass reinforced concrete), 2.38 m long with a section of approximately 6 x 27 cm, are mass coloured in earth, white or grey tones, with a waterproof exposed aggregate finish. Various finishes and colours are possible,
depending on the quantity ordered.
The support structures come in three types (high, low or mixed) and are made in AG3 cast aluminium with an anodized finish.

Dimensions (cm):

RIB01 > 20 x 12 x 5
RIB11 > 48 x 17 x 47
RIB12 > 48 x 17 x 77
RIB13 > 48 x 17 x 77
RIB21 > 250 x 50 x 40
RIB23 > 250 x 50 x 40


Weight (Kg):


RIB01 > 0,65
RIB11 > 4,50
RIB12 > 5,90
RIB13 > 5,20
RIB21 > 100
RIB23 > 100

Colours & Finishes

Ground/Earth & Grey 

Instalation: The concrete blocks are attached by stainless steel screws to the aluminium supports.
Several options of installation and levelling plates allow you to choose the best solution to place the bench freestanding or fixed with
stud anchors secured in holes drilled into the paving and filled with epoxy resin, quick-setting cement or similar. The bench is delivered
dismantled with assembly instructions. The screws and stud anchor are delivered with the supports.
Maintenance: Because of the properties of the material, no functional maintenance is required.
(For further information about this product, visit the website urbidermis.com)

Applicable standards:UNE-EN 13369, UNE-EN 13198, UNE-EN 13369, UNE-EN 12390-3, UNE-EN 12504-1, UNE 41510 / UNE-EN ISO 9227 / EN ISO 7599


Interested in this product?
Call 0114 282 1283
OR
 
 
 
Downloads
  • Urbidermis Rai bench Technical Specification
    Urbidermis Rai bench Technical Specification
    2pp 625.61KB
    Download
 
 
 
Enquire
 


Related entries

  • All Urban: PeriSphere bench by Santa & Cole Urbidermis
    PeriSphere bench by Santa & Cole Urbidermis
    All Urban
    In tribute to the bench that Robert Moses and Kenneth Lynch designed for the 1939 World's Fair in New York and which ended up being the most used in the city, our editors asked James Corner Field Operations (JCFO) - the...
  • All Urban: Moon bench by Santa & Cole Urbidermis
    Moon bench by Santa & Cole Urbidermis
    All Urban
    Perfect for parks and large avenues, the Moon is a modular, versatile piece that can be joined together in rows, providing seating with or without backrest. Made of wood and cast iron with architectural shapes, it clarifies...
  • All Urban: NeoRomantico Clasico bench by Santa & Cole Urbidermis
    NeoRomantico Clasico bench by Santa & Cole Urbidermis
    All Urban
    A new, improved version of the classic wood and metal street bench. Its meticulous ergonomics and elegance have made it a best seller and an inspiration for many others. It has ergonomically designed cast aluminium legs, and...
  • All Urban: Trapecio bench by Santa & Cole Urbidermis
    Trapecio bench by Santa & Cole Urbidermis
    All Urban
    Two Glulam timber beams make up a large bench that offers an array of possibilities for urban recreational areas. The supports are made of hot-dip galvanised steel with a painted finish, the two beams are fixed using steel...
  • All Urban: Bancal bench by Santa & Cole Urbidermis
    Bancal bench by Santa & Cole Urbidermis
    All Urban
    Conceived as a modular and versatile element, it allows large alignments and seat surfaces to be formed, with or without backrest: bent 6 mm steel sheet structure with anti-rust protection and powder-painted; the seat and...
  • All Urban: Comunitario bench by Santa & Cole Urbidermis
    Comunitario bench by Santa & Cole Urbidermis
    All Urban
    Comunitario benches have a practical, wide-seated design, specifically designed for urban settings. Available with or without backrest, is designed as an open and neutral support system catering for different use options.
Not found what you're looking for? View other options

Ask All Urban about

Rai bench by Santa & Cole Urbidermis