Ground Engineering, Hard Landscaping, Traffic Control, Leisure & Recreation, Soft Landscaping
Other ESI.info sites    Advertise     
 

Zaun

 
 
 
System type Steel palisade systems
Product accreditation LPS 1175 Security Rated
Overall height 2.8 to 6m
 
 
 

Steel mesh fencing manufacturer Zaun has developed a high-security fence that resists sustained attack with specialist power tools for more than 10 minutes.

Zaun has received a revised Certificate of Product Approval from the Loss Prevention Certification Board (LPCB) to include its new CorruSec SR4, approved to Security Rating 4.

The fencing system incorporates corrugated HiSec fencing sandwiched between panels of Super10.

Composition and manufacture

The concept was the brainchild of Zaun Co-founder and Director Alastair Henman in response to customer requests and has been developed by Research & Development Manager Adam Christie.

Christie explains: “Alastair noticed that corrugated cardboard creates a much stronger three-dimensional material.

“So we started experimenting with a corrugated steel centre section to give fencing greater rigidity and increase its thickness without adding much to the material content and weight, to counter the kind of tools attackers might use.”

Testing

CorruSec SR4 has been subjected to sustained attack by testers from the Buildings Research Establishment (BRE) wielding category D tools, including:

  • 12V jigsaws and disk grinders
  • Axes including an 850mm felling axe
  • Ahooligan bar
  • 1.5kg lump hammer
  • 500mm long bolt cutters

Despite this force, they could not breach the CorruSec SR4 in less than 10 minutes.

Technical data

The fencing system is approved at heights from 2.8 to 6m above the ground, while options for 300mm of buried fencing, toppings and stepping up gradients of up to 30º are included in the registered design.

Henman says: “We had been approached by railway line builders and utilities in the Middle East interested in a ‘10-minute fence’, so we set about seeing if we could create a viable product.

“Across our customer base, operators of critical national infrastructure are upgrading their most sensitive sites given heightened fear of terrorist threats and the advances in technology, such as our CorruSec product.”

Accreditations

Further Zaun security systems have achieved Security Ratings including their HiSec Super10, Duo8 and HiSec 358 systems (certificate number 1164a/05) and are entered into the Red Book for LPS 1175: Issue 7.

Zaun manufactures all these systems in-house at its West Midland HQ, where the product testing and factory controls are rigorous and set the product apart from 're-sold' fencing. That's why Henman is confident of maintaining the rating when the LPCB conducts its regular independent audits.

Henman adds: “We produce our own mesh, a claim many infer but do not do. Our doors are always open to the LPCB and potential customers who would like to see for themselves where the product is made and how its quality is assured.

“And I urge all specifiers and end users to insist not just on certified product but also that they are installed to the approved drawings.“

To maintain accreditation and a listing in the LPCB Red Book, manufacturers must regularly demonstrate to independent auditors that they are producing products consistent with those tested. This gives the customer the guarantee that they are getting a secure and quality product.


Steel mesh fencing manufacturer Zaun has developed a high-security fence that resists sustained attack with specialist power tools for more than 10 minutes.

Zaun has received a revised Certificate of Product Approval from the Loss Prevention Certification Board (LPCB) to include its new CorruSec SR4, approved to Security Rating 4.

The fencing system incorporates corrugated HiSec fencing sandwiched between panels of Super10.

Composition and manufacture

The concept was the brainchild of Zaun Co-founder and Director Alastair Henman in response to customer requests and has been developed by Research & Development Manager Adam Christie.

Christie explains: “Alastair noticed that corrugated cardboard creates a much stronger three-dimensional material.

“So we started experimenting with a corrugated steel centre section to give fencing greater rigidity and increase its thickness without adding much to the material content and weight, to counter the kind of tools attackers might use.”

Testing

CorruSec SR4 has been subjected to sustained attack by testers from the Buildings Research Establishment (BRE) wielding category D tools, including:

  • 12V jigsaws and disk grinders
  • Axes including an 850mm felling axe
  • Ahooligan bar
  • 1.5kg lump hammer
  • 500mm long bolt cutters

Despite this force, they could not breach the CorruSec SR4 in less than 10 minutes.

Technical data

The fencing system is approved at heights from 2.8 to 6m above the ground, while options for 300mm of buried fencing, toppings and stepping up gradients of up to 30º are included in the registered design.

Henman says: “We had been approached by railway line builders and utilities in the Middle East interested in a ‘10-minute fence’, so we set about seeing if we could create a viable product.

“Across our customer base, operators of critical national infrastructure are upgrading their most sensitive sites given heightened fear of terrorist threats and the advances in technology, such as our CorruSec product.”

Accreditations

Further Zaun security systems have achieved Security Ratings including their HiSec Super10, Duo8 and HiSec 358 systems (certificate number 1164a/05) and are entered into the Red Book for LPS 1175: Issue 7.

Zaun manufactures all these systems in-house at its West Midland HQ, where the product testing and factory controls are rigorous and set the product apart from 're-sold' fencing. That's why Henman is confident of maintaining the rating when the LPCB conducts its regular independent audits.

Henman adds: “We produce our own mesh, a claim many infer but do not do. Our doors are always open to the LPCB and potential customers who would like to see for themselves where the product is made and how its quality is assured.

“And I urge all specifiers and end users to insist not just on certified product but also that they are installed to the approved drawings.“

To maintain accreditation and a listing in the LPCB Red Book, manufacturers must regularly demonstrate to independent auditors that they are producing products consistent with those tested. This gives the customer the guarantee that they are getting a secure and quality product.




Not found what you're looking for? View other options

Zaun

 

Email Zaun

High-security corrugated 10-minute fencing Edit subject line