Expanded polystyrene core
Fibre cement outer skin
up to 2.4m
600mm, 900mm, 1200mm
100mm x 100mm
up to a 3.15m
EliteWall™ is a modular wall fence constructed with cement-based panels with aluminium supporting columns. This fencing system provides a cost-effective alternative to traditional block masonry walls while achieving the same visual appearance and feel as a rendered wall.
EliteWall is suitable for both residential and commercial applications.
Standard wall panels
Material: fibre cement outer skins with an EPS core
Height: 600mm, 900mm, 1200mm
Noise reduction (Rw): 28dB
Material: aluminium with light grey powder-coated finish
Section: 100mm x 100mm
Length: up to a 3.15m (2.4m wall height)
Fences and walls can be customised to suit requirements:
Retain up 750mm
Height: up to 2.4m
Width: up to 1.2m (single gate) and 2.4m (double gate)
Locking system: provided with a lockable latch
Finish: a self-priming paint can be used if pre-primed
Panel decorative infill
Aluminium slats (powder-coated grey as standard but can be pre-primed and painted to preferred colours) and timber trellis. Wrought iron can also be installed.
Cable for lighting, intercom and sound systems can be installed in the hollow posts and panel rebate.
A letter box can be mounted into the post.
Post caps (flush, ball, or pyramid), wall caps (standard flush or standard box panel), and panel joints (standard or expressed).
From £56/m2 (based on full base for bays of 10+ m)