Civic / industrial
EN 1433: Class D400
|Dimensions (l x w x d)||
1000 or 500mm lengths; 160mm width; 170 to 270mm depth
|Unit weight (kg)||
Pave Drain is an integrated high strength concrete drainage unit that complements the Marshall's most popular paving products. The system can be used to create a water management solutions that seamlessly integrate into any urban landscape or to create subtle but effective delineation between pedestrian and vehicular areas.
Concrete and natural stone tops are available in horizontal or diagonal slot designs. Each top fits onto constant depth channel allowing suface water to drain away below the surface of the pavement.
A comprehensive range of accessories includes junction channels, channel transitions, end cap and cap outlets, outfalls and access covers.
Pave Drain tops are produced to complement Marshalls' most popular concrete and natural stone products.
Conservation Silver Grey, textured
Saxon Buff, texured
Natural stone tops
Mid Grey Granite
Silver Grey Granite
Pave Drain units achieve a loading classification of D400.
This makes them suitable for any road-going vehicle in urban settings.
They are not suitable for public road carriageways or motorways.
Constant depth channels are in two lengths in a range of depths.
Channel length: 1000mm or 500mm
Channel width: 160mm
Channel invert width: 100mm
5 depths in 25mm increments.
Channel 0/0: 154mm
Channel 5/0: 179mm
Channel 10/0: 204mm
Channel 15/0: 229mm
Channel 20/0: 254mm
Channel invert depths are 50mm less than the overall depth.
Channels can be connected using right and left Junction Channels and Channel Transitions.
Transition Channels increase drainage discharge capacity by improving flow rates.
Transition Channels are 1000mm long.
End Caps and Cap Outlets, and Outfall and Access Covers complete the system.
A complementary design service for commercial channel drainage and water management projects is available.