Automatic retractable bollards designed to withstand direct impact forces in excess of 1800 KJ.
The SB970CR Scimitar bollard is designed & physically impact tested in both single and dual formats conducted in accordance with BSi PAS 68 by the Transport Research Laboratory (TRL Ltd). The bollard remained operational post-test. It achieved a PAS 68 classification of V/7500(N2)/80/90:0/25. The bollard has also been tested in a dual formation and achieved zero penetration of the vehicle.
The rising bollard comes with a push-button hold to run control as standard.
The bollard system can be customised to interface with a wide range of access control equipment to suit specific customer requirements. Available configurations include (but are not limited to) inductive loop systems, card readers, communication equipment and manned guard emergency systems.
Designed and manufactured by engineers with significant experience in the fields of high security and access control the SB970CR retractable bollard is simple to install in conjunction with BSi PAS 69 guidelines.
PAS 68 & IWA 14-1 tested bollards should be installed in accordance with the correct foundation drawings and should be installed with a clear distance of 1200mm (measured 600mm above ground level) between the facing edges of each bollard. Please refer to BSi PAS 69 or IWA 14-2 for guidance.